Home>Consumer Electronics>Computer Accessories>Riser Card>ADT-Link M.2 WiFi A.E Key A+E To PCI-e 4x x4 Riser Extender Adapter Card Ribbon Gen3.0 Cable AE Key A E For PCIE 3.0 x1 x4 x16 M2 Card
ADT-Link M.2 WiFi A.E Key A+E To PCI-e 4x x4 Riser Extender Adapter Card Ribbon Gen3.0 Cable AE Key A E For PCIE 3.0 x1 x4 x16 M2 Card

ADT-Link M.2 WiFi A.E Key A+E To PCI-e 4x x4 Riser Extender Adapter Card Ribbon Gen3.0 Cable AE Key A E For PCIE 3.0 x1 x4 x16 M2 Card Item NO.: F32085-F32120

Write a Review
US$ 12.56
Cable length:
5cm 10cm 15cm 20cm 25cm 30cm 35cm 40cm 50cm 60cm 80cm 100cm
Version
R52SF R52SL R52SR
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name ADT-Link M.2 WiFi A.E Key A+E To PCI-e 4x x4 Riser Extender Adapter Card Ribbon Gen3.0 Cable AE Key A E For PCIE 3.0 x1 x4 x16 M2 Card
Item NO. F32085-F32120
Weight 0.025 kg = 0.0551 lb = 0.8818 oz
Category Consumer Electronics > Computer Accessories > Riser Card
Brand ADT-Link
Creation Time 2019-09-26

ADT-Link M.2 WiFi A.E Key A+E To PCI-e 4x x4 Riser Extender Adapter Card Ribbon Gen3.0 Cable AE Key A E For PCIE 3.0 x1 x4 x16 M2 Card

 

Product name: PCIe graphics card extension cord

Product model: R52SF R52SL R52SR

Connector 1:  PCIe x4

Connector 2:  M.2 WiFi A.E key

Wire length: 5 ~ 100cm
 

 

The length of the wire instructions:
Our wire length refers to the visual wire part, does not include the PCB and connector.

The following models is 5 cm, refer to the below dimension.

 

Product advantage:

1. Wire advantages: using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 8G/bps stable transfer.
2.Cable length: from 5 cm to 80 cm can be customized, our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing.
3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability.
4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen.

Purchase Notice:

1. You must identify the direction when you plug in this cable. Don’t reverse insert and bend, prevent burning equipment.

2. All kinds of Motherboard and equipment condition such as signal driving ability is different, the results of our test does not guarantee that it is the same as your test results. You need to know, as long as using a extension cable, the signal will have a loss. The buyer who requires perfectly, please don't buy.

3. The graphics card or motherboard is an electronic equipment which will increase over time and oxidative aging. It will become more unstable if plug in an extension cable. Does not support the old equipment. The device which is more than four years, please don't buy.

4. Only use for product testing, If other purposes or don't have DIY ability, please don't buy.

5. Please confirm your equipment and the motherboard system compatibility, Our cable only supports M.2 WiFi interface (A.E.Key), please confirm whether your motherboard has a M.2 WiFi interface, if can't confirm, please do not buy.

6. The laptop of HP and Lenovo these two brands have BIOS compatible problems, it may cause your network card cannot be used.Please confirm your laptop and network card compatibility, if cannot confirm, please do not buy.

 

No related record found