Home>Computer Accessories>ADT-Link For M.2 NVMe SSD Extension Adapter Cable PCI-E 4.0 x4 64G/bps for M2 M-key NVME 2230 2242 2260 2280 22110 Solid State Drives
ADT-Link For M.2 NVMe SSD Extension Adapter Cable PCI-E 4.0 x4 64G/bps for M2 M-key NVME 2230 2242 2260 2280 22110 Solid State Drives

ADT-Link For M.2 NVMe SSD Extension Adapter Cable PCI-E 4.0 x4 64G/bps for M2 M-key NVME 2230 2242 2260 2280 22110 Solid State Drives Item NO.: F53261-B1 F53261-B2

US$ 17.23 ~ US$ 19.14
Quantity 0-3 4-50 51-100
Discount 0% OFF 5% OFF 10% OFF
Price US$ 19.14 US$ 18.18 US$ 17.23
Version
25CM-M44SF 15CM-M44SF
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name ADT-Link For M.2 NVMe SSD Extension Adapter Cable PCI-E 4.0 x4 64G/bps for M2 M-key NVME 2230 2242 2260 2280 22110 Solid State Drives
Item NO. F53261-B1 F53261-B2
Weight 2024 kg = 4462.1562 lb = 71394.4990 oz
Volume 1 CBM
Category Computer Accessories
Brand ADT-Link
Creation Time 2024-11-29

ADT-Link For M.2 NVMe SSD Extension Adapter Cable PCI-E 4.0 x4 64G/bps for M2 M-key NVME 2230 2242 2260 2280 22110 Solid State Drives



Product Model: M44SF



Product Name:M.2 NVMe SSD Extension Cable

Cable length: 15cm,25cm (support cable length customisation)

Applicable hard drive: support M.2 NVMe , Ultra SSD SSD.

Speed: PCIe 4.0x4 ; 64G/bps 

Purchase Restrictions: Only for professional engineers to specify the purchase, 

ordinary use is not suitable for can not be used.


Purchase Tips: Be sure to buy 1~2 samples first to test and verify that 

there is no error before purchasing in bulk.

Friendly reminder: This product is compatible with a lot of problems, 

incorrect assembly or improper operation will burn your equipment. 

Limited to professional engineers specified purchase.

Note:
① Model M44SF supports PCIe4.0, but as long as the extension cable is connected, 

the signal will be attenuated. This product does not guarantee the full speed of PCIE4.0, 

the cable length is too long, equipment aging, poor signal or bad environment, 

please slow down the use.

② Model M44SF default does not weld the power cord, more than 60cm (including 60cm) 

If you need to weld the power cord, please contact customer service.

Wire length and hole spacing instructions.

Length refers to the length of the wire, excluding PCB and connectors. 

Please refer to the red arrow in the picture below for the length of the wire. 

Screw hole spacing refer to the green arrow size marking, 

the length of the wire will have a certain degree of error, 

the specific error situation refer to the following chart:



Product Advantages.
1. Wire advantage, the use of German patented imported wire, the use of Taiwan imported Lotes connector, high-frequency support for PCIe 3.0 stable transfer.
2. Wire length advantage, from 5 cm to 1 metre can accept custom-made, this adapter cable, wire impedance is low, within 60 cm length to support PCIe3.0 full speed.
3. Differential signals without over-hole design, there is no parasitic capacitance and parasitic inductance of the signal attenuation interference problems, not to mention the CAF micro-short phenomenon, the product is durable.
4. The product selection of high-quality materials, PCB precision workmanship, copper thickness thickened to 1oz, gold-plated gold finger content, gold-plated enough conductivity is good, can reduce oxidation and rust impedance caused by elevated blue screen of death problems.
5, the product selection of the wire itself is very durable, the use of metal at the 
point of welding thickness of up to 3mm PCB spacer protection, and locking screws 
and hexagonal nut fastening, the product is strong and reliable pulling, anti-interference, 
there will be no broken line off the nail problem. Wire can be bent or folded, does not affect the use.


6.PCB dwarf and fat design, dwarf will not be stuck to the graphics card, 
fat and long design to make the board easier to install, reduce the chance of damage.

R44SF product real-life shooting:


M44SF product real-life shooting:


Purchase Notes:
1. When plugging the line must be clear direction, do not insert the reverse or insert bias, to prevent burned equipment, plug the line first hold the socket of the equipment and then plug the line to avoid over-exertion of force will be the socket pins plugged off.
2. A variety of motherboards and equipment signal drive capacity and other conditions are not the same, we do not guarantee that the results of the test and you are the same, as long as it is connected to the extension cord, the signal will have loss.
3. Graphics card or motherboard is an electronic product will increase with time and aging oxidation, does not support the old equipment. If your device is more than 3 years old, please do not purchase.
4. Limit the purchase to those who are designated by the engineering staff, and those who do not have the DIY ability to install it by themselves, please do not buy it.
5. Do not purchase if your SSD is a two notch SATA SSD which is not compatible.
Support one notch M-key NVMe SSD ; Not support two notch BM-key SATA SSD.


No related record found