Home>Camera Accessory>Screw & Adapter>ADT-Link FPV USB 3.0 Type-A 90 degree Adapter 5cm-40cm FPC Ribbon Flat USB Cable 3A 5G/bps for Multicopter Aerial Photography

ADT-Link FPV USB 3.0 Type-A 90 degree Adapter 5cm-40cm FPC Ribbon Flat USB Cable 3A 5G/bps for Multicopter Aerial Photography Item NO.: F39977-B6

US$ 4.73 ~ US$ 5.25

Quantity	0-3	4-50	51-100
Discount	0% OFF	5% OFF	10% OFF
Price	US$ 5.25	US$ 4.99	US$ 4.73

Quantity: Stock ( 9999999 )

Estimate Shipping Cost

Product Name	ADT-Link FPV USB 3.0 Type-A 90 degree Adapter 5cm-40cm FPC Ribbon Flat USB Cable 3A 5G/bps for Multicopter Aerial Photography
Item NO.	F39977-B6
Weight	0.029 kg = 0.0639 lb = 1.0229 oz
Category	Camera Accessory > Screw & Adapter
Brand	ADT-Link
Creation Time	2021-07-05

ADT-Link FPV USB 3.0 Type-A 90 degree Adapter 5cm-40cm FPC Ribbon Flat USB Cable 3A 5G/bps for Multicopter Aerial Photography

Brand: ADT-link
Product model: USS series products
Product name: USB3.0 Type A adapter extension cable
Wire length: 5cm-40cm (If you need other lengths, please contact us to change the price, thank you.)
Adaptation range: USB 3.0 type A
Speed bandwidth: USB 3.0 5G/bps (support 10G/bps high speed within 50cm, 5G/bps within 1 meter)
Current capability: 5V/3A (measured to support 3A within 50cm, and 1.5A within 1 meter)
Product application: GPS navigator, ROCK Pi 4 Raspberry Pi microcontroller development board, built-in USB device to extend the use of adapter, convenient for brushless pan/tilt, steering gear pan/tilt, Xiaosi pan/tilt, SLR handheld pan/tilt USB Power supply and AV transmission, etc.
Purchase restriction: This product is designed to be connected to built-in USB devices. It is not suitable for ordinary external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. It does not support OTG external use, is not suitable for civilian use, is not easy to use for general use, and does not support return and exchange. Please consider carefully before placing an order.
Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.
Note: The length of the wire refers to the part of the visible wire, excluding PCB and connectors.
Following picture demo the length of 5cm for model S1A-S1B.
Product advantages:
Material advantages: use German patented imported wire, use high quality gold-plated connectors, high frequency support HDMI 2.0 stable transfer. PCB uses high-quality low-resistance high-quality materials, PCB workmanship precision, PCB uses high TG sheet, copper thickness is thickened to 1oz; connector gold-plated conductive performance, can reduce the black screen blue screen splash caused by increased oxidation rust resistance Flower screen problem.
Design advantages: differential signal without via design, no CAF micro short circuit phenomenon, high speed signal data transmission without parasitic capacitance and parasitic inductance signal attenuation interference problem, power circuit enhanced wiring design, PCB board miniaturization design, can reduce mechanism interference , no card hardware, product installation is easy.
Production advantage: Our factory direct sales, product customized production, welding at the metal welding point during production. And put on the heat-shrinkable tube protection, the product is firm and reliable, there will be no problem of disconnection and disconnection. The product works well, stable and reliable.