Copy and share this link on social network or send it to your friends
Copy| Product Name | ADT Link 4.0 PCI-E x4 Extension Cable Adapter x16 Supports Network Card Hard Disk USB Card |
| Item NO. | F53237-B1 B2 F53238-B1 B2 F53239-B1 B2 |
| Weight | 0.065 kg = 0.1433 lb = 2.2928 oz |
| Category | Computer Accessories |
| Brand | ADT-Link |
| Creation Time | 2024-10-12 |
ADT Link 4.0 PCI-E x4 Extension Cable Adapter x16 Supports Network Card Hard Disk USB Card
Brand: ADT Link
Product Name: PCI-E 4.0 x16 to x4 Adapter Extension Cable
Wire length: 5-100cm, (supports customized wire length)
Bandwidth speed: PCIe 4.0 x4 gen4 64G/bps
Applicable card configuration: wireless network card, wired network card, data acquisition card, USB card, solid-state drive card, as long as the PCIe card
is x4 and the motherboard slot is x16 interface, it can be supported.
Description: PCIe x16 to x4 to 180 degree clamp vertical extension cable, model: M36-M2F, bandwidth: PCIe 4.0 x4
Description: PCIe x16 to x4 to 90 degree vertical bend extension line, model: M36-M2L, bandwidth: PCIe 4.0 x4
Description: PCIe x16 to x4 to 270 degree vertical bend extension line, model: M36-M2R, bandwidth: PCIe 4.0 x4
Procurement reminder: For bulk orders, it is necessary to first purchase 1-2 samples for testing and verification before purchasing in large quantities.
Friendly reminder: This product has many compatibility issues, and incorrect assembly or improper operation may burn your device. Purchase designated by
professional engineers is restricted. This product is a customized item that cannot be returned or exchanged. Please consider and confirm before placing an
order for purchase.
Wire length description:
Our store's wire length refers to the visible part of the wire, excluding PCB and connectors. If PCB and
connectors are included, an additional 3cm is required.
Product advantages:
1、 Advantages of cables: ADT's self-developed fourth generation shielded high-speed cables use high-quality connectors and support PCIe 4.0 x4 gen4 stable
transmission at high frequencies.
2、 The advantage of wire length is that it can be customized from 3 centimeters to 1 meter. The adapter wires sold in our store have low impedance, and a
wire length of less than 60cm can stably support PCIe 4.0 full speed.
3、 Differential signal without via design, there is no signal attenuation interference caused by parasitic capacitance and inductance, and there will be no
CAF micro short circuit phenomenon. The product is durable and long-lasting.
4、 The PCB is made of high-quality materials with high frequency and low resistance, with precise workmanship. The PCB uses high TG board, and the
thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content, and the gold plating foot has good conductivity,
which can reduce the problem of freezing and sound caused by oxidation, rust, impedance increase.
5、 The wire used in the product is already very durable. It is protected by PCB pads with a thickness of 3mm at the metal welding points, and fastened with
screws and hex nuts. The product is sturdy, reliable, resistant to pulling, anti-interference, and will not have problems such as wire breakage or nail drop.
6、 PCB dwarfing and thickening design, dwarfing will not get stuck in the graphics card, while thickening and lengthening design makes the board easier to
install and reduces the probability of damage.
SKYPE: +8613640955802
Email：yxy@xt-xinte.com
No related record found