Copy and share this link on social network or send it to your friends
CopyProduct Name | 868MHz/915MHz RFID IOT Receiver Remote Control SAW Bandpass Filter 1dB 4MHz Bandwidth with SMA Connector for Radio Amplifiers |
Item NO. | F46529 F46530 F46537 F46544 F46539 F46540 F46545 |
Weight | 0.02 kg = 0.0441 lb = 0.7055 oz |
Category | Consumer Electronics > Computer Accessories |
Brand | XT-XINTE |
Creation Time | 2022-03-11 |
868MHz/915MHz RFID IOT Receiver Remote Control SAW Bandpass Filter 1dB 4MHz Bandwidth with SMA Connector for Radio Amplifiers
SMA-M means male connector
SMA-F means female connector
868MHz filter:
The 1dB bandwidth of this filter is 4MHz, optimized for the performance of 868MHz RFID receivers, standard LoRa IoT node devices
European, which can effectively filter out-of-band signals, reduce noise, and increase dynamic range.
Model: FBP-868s
Impedance: 50 Ohms
Center Frequency: 868MHz
Passband (1dB bandwidth): 866 to 870 MHz
Band insertion loss: <3.5 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F
915MHz filter:
This filter has a 26MHz 1dB bandwidth and is optimized for use in 915MHz RFID receivers to effectively filter out-of-band signals, reduce noise and increase dynamic range.
Model: FBP-915s
Impedance: 50 Ohms
Center Frequency: 915MHz
1dB pass band: 902 to 928 MHz
Band insertion loss: <= 2.0 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F
2.4G 2400MHz filter:
This filter has a center frequency of 2450MHz, a bandwidth of 150MHz, and an LC bandpass structure. It is used to optimize the performance of 2.4GHz receivers and to avoid interference from WiFi, Bluetooth and Zigbee compatible systems. It can effectively filter out-of-band signals, reduce noise, and increase dynamic range.
Model: FBP-2400
Impedance: 50 Ohms
Center Frequency: 2450MHz
1dB pass band: 2400-2500 MHz
Insertion loss: < 2 dB @ 2400 ~ 2500 MHz
Maximum load power: 10 W (40 dBm) @ 1 minute
Interface: SMA-M, SMA-F
902MHz filter:
This filter has a 25MHz 1dB bandwidth and is used for GSM900 testing in the 890 - 915MHz frequency range. It can effectively filter out-of-band signals, reduce noise and increase dynamic range.
Model: FBP-902s
Impedance: 50 Ohms
Center frequency: 902MHz
Bandwidth (1dB bandwidth): 890 ~ 915MHz
Band insertion loss: 2.0-2.5 dB (typical value: 2.2 dB)
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F
915 868MHz filter:
This device is a compact low-pass filter with an insertion loss of less than 1 dB in the access band (< 1000 MHz).
The filter can be extended to 3 GHz with an insertion loss of more than 40 dB, without abnormal oscillations at the upper end of the frequency range, and the performance index is much better than other bare PCB processed products. Specially designed for 915MHz and 868MHz band small and medium power RFID transceiver system to strongly eliminate second, third harmonic and spurious frequency signals.
Model: FLP-915
Impedance: 50 Ohms
Insertion loss: < 1 dB @ < 1000 MHz
~50dB @ 1830MHz (2x915)
> 40dB @ 2745MHz (915x3)
Maximum load power: 5 W (37 dBm)
1090MHz filter:
This filter guarantees an access bandwidth of 30MHz with low insertion loss. Optimized for performance on 1090MHz ADS-B receivers,
Effectively filters out-of-band signals, reduces noise and increases dynamic range. The device is ultra-small and easy to use.
Model: FBP-1090s
Impedance: 50 Ohms
Center Frequency: 1090MHz
Bandwidth (1 dB bandwidth): 30 MHz
30dB Bandwidth: <80MHz
Band insertion loss: 1.7 to 2.2 dB
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F
5.8G filter:
This filter has a center frequency of 5750MHz and a 3dB bandwidth of about 600MHz, and is a film circuit structure
fine multi-layer It is used for interference resistance and performance optimization of 5.8G wisax, WiFi and other wireless system receiving devices. It can effectively filter out-of-band signals, reduce noise, and increase dynamic range.
Model: FBP-5800
Impedance: 50 Ohms
Center Frequency: 5750MHz
3 dB band: 5450 ~ 6100 MHz
Insertion Loss: <2.5dB @ 5100~6050MHz
Maximum load power: 5 W (37 dBm)
Interface: SMA-M, SMA-F (symmetrical RF characteristics at both ends, non-directional)
433MHz filter:
This filter has a low insertion loss in band and is specially designed to optimize the performance of the transmitting receiving equipment.
433MHz imaging (aerial model, UAV aerial photography), which can effectively filter out-of-band signals, reduce noise and increase range
dynamic. This product has ultra-thin PCB board inside, which still has excellent suppression ability for far out-of-band signals, and its performance is much better than products made of bare PCB board; Protective shell uses aluminum alloy, which is anti-interference, no false out-of-band response, compact, durable and easy to use.
Model: FBP-433s
Impedance: 50 Ohms
Center Frequency: 433.92MHz
3 dB pass band: 422 to 446 MHz
Insertion Loss: <1.8 dB @ 430 to 438 MHz
Maximum load power: 100 mW (20 dBm)
Interface: SMA-M, SMA-F
400-475MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
400 ~ 475 MHz (433.92 MHz, 435MHz) Dedicated VTX receiver, laboratory and other highly selective applications.
Model: FBP-433
Impedance: 50 Ohms
Center Frequency: 433MHz
Center Frequency Insertion Loss: <= 3.5 dB @ 433 MHz
3 dB bandwidth: 390 to 470 MHz
30 dB bandwidth: 350 to 560 MHz
Impedance band greater than 50 dB: DC ~ 250 MHz and 1100 ~ 2500 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F
2.4G 2440MHz filter:
This filter has a bandwidth of 80MHz and is used to optimize the performance of 2.4GHz receivers and to prevent WiFi interference,
systems compatible with Bluetooth and Zigbee. Which can effectively filter out-of-band signals, reduce noise and increase dynamic range.
Model: FBP-2440s
Impedance: 50 Ohms
Center Frequency: 2440MHz
Spurious: 2400 ~ 2480 MHz
Band insertion loss: <3.5 dB
Maximum load power: 10mW (10dBm)
Interface: SMA-M, SMA-F
144MHz filter:
The characteristics
Ultra-small size, excellent selectivity, high out-of-band rejection.
The applications
144MHz for communication receivers, for HAM 2m band, laboratory and other high selectivity applications.
Model: FBP-144
Impedance: 50 Ohms
Center Frequency: 144MHz
Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 144 MHz
3 dB bandwidth: 127 to 157 MHz
30 dB bandwidth: 105 to 200 MHz
Impedance band greater than 50 dB: DC ~ 85 MHz and 300 ~ 1400 MHz
Maximum load power: 3 W (35 dBm)
Interface: SMA-M, SMA-F
915(890-970)MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
Dedicated 890-970 MHz VTX receiver, laboratory and other highly selective applications.
Model: FBP-915
Impedance: 50 Ohms
Center Frequency: 935MHz
Center Frequency Insertion Loss: 2.3 to 2.8 dB @ 915 MHz
3 dB bandwidth: 890 to 970 MHz
30 dB bandwidth: 780 to 1070 MHz
Impedance band greater than 50 dB: DC ~ 500 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F
900MHz filter:
This product is a narrow band low noise RF amplifier, the product covers 10MHz ~ 2.4GHz frequency band. It can improve the sensitivity
receiver and reduce system noise. This product has a strong aluminum protective shell, anti-electromagnetic interference, shape
compact, can be directly inserted into the original antenna system to use. (Note: This product is not waterproof, waterproof treatment needs to be done for outdoor use.)
Model: AMP-900
Impedance: 50 Ohms
Noise factor: <= 2.5dB
Center Frequency Gain: >= 20 dB @ 850 ~ 950 MHz (Typical Value: 20 ~ 22 dB
Input reflection loss: > 15 dB @ 900 MHz
Supply voltage: + 5 VDC
Operating current: 15 to 20mA
Maximum input power: < 0 dBm
P1dBm: ≈ 6dBm
403MHz filter:
This filter has a low insertion loss in band and is designed to optimize the performance of 403 MHz satellite reception equipment.
It can effectively filter out-of-band signals, reduce noise, and increase dynamic range. This product has an ultra-thin PCB board on the
inside, which still has excellent suppression ability for far out-of-band signals, and its performance is much better than those of
products made of bare PCB board; Uses an aluminum alloy protective shell, which is anti-interference, has no false feedback outside
band, compact, resistant and easy to use.
Model: FBP-403s
Impedance: 50 Ohms
Center Frequency: 403MHz
1dB pass band: 401-405 MHz
Insertion Loss: < 2.5dB @ 401 ~ 405 MHz
Maximum load power: 100mW (20 dBm)
870MHz filter:
The characteristics
Ultra-small size, low insertion loss, excellent selectivity, high out-of-band rejection, great power handling.
The applications
GSM mobile test systems, RFID communication systems, laboratories and other highly selective applications.
Model: FBP-870
Impedance: 50 Ohms
Center Frequency: 870MHz
Center Frequency Insertion Loss: 2.5 to 3.0 dB @ 870 MHz
3dB Bandwidth: 825 to 920MHz
30 dB bandwidth: 740 to 1000 MHz
Impedance band greater than 50 dB: DC ~ 650 MHz and 1150 ~ 2200 MHz
Maximum load power: 10W (40dBm)
Interface: SMA-M, SMA-F
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found