Home>DIY RC Drone Accessories>Motor>4x DC Motor DC3V-6V Low Voltage 310 Micro Motor Long Shaft 10mm/17mm for Solar Four-Wheel Drive Car DIY Experimental Small Toys

4x DC Motor DC3V-6V Low Voltage 310 Micro Motor Long Shaft 10mm/17mm for Solar Four-Wheel Drive Car DIY Experimental Small Toys Item NO.: F29245/F29289

US$ 1.35 ~ US$ 1.50

Quantity	0-3	4-50	51-100
Discount	0% OFF	5% OFF	10% OFF
Price	US$ 1.50	US$ 1.43	US$ 1.35

Version: 17mm short shaft 17mm Long shaft

Quantity: Stock ( 19999998 )

Estimate Shipping Cost

Brand Name:XT-XINTE
Material:Metal
Theme:Robots
Type:Micro MotorAge
Range:5-7 YearsModel
Number:F29245/F29289
Gender:Unisex
Warning:Please carefully
Scale:310 DC MotorQuantity of
Items in Set:4

Product Name	4x DC Motor DC3V-6V Low Voltage 310 Micro Motor Long Shaft 10mm/17mm for Solar Four-Wheel Drive Car DIY Experimental Small Toys
Item NO.	F29245/F29289
Weight	0.95 kg = 2.0944 lb = 33.5103 oz
Category	DIY RC Drone Accessories > Motor
Brand	XT-XINTE
Creation Time	2019-06-14

4x DC Motor DC3V-6V Low Voltage 310 Micro Motor Long Shaft 10mm/17mm for Solar Four-Wheel Drive Car DIY Experimental Small Toys
These product is a brand new 310 DC motor with low noise and low starting current. It is suitable for making various toy toys such as solar toys or hand crank generators. The shaft is longer and easier to use.

Shaft 10mm:
Height: 18mm
Diameter: 24mm
Axis diameter: 2mm
Axis length: about 10mm (starting from the step)
Voltage: 1.5v-6v

Rotating speed:
3v current 0.05A, locked rotor current 0.85A, speed 7200 rpm
Current is 0.08A at 6v, locked current is 0.91A, and rotation speed is 14000 rpm.
weight: about 27.6 Grams / Piece
Shaft 17mm:
Height: 18mm
Diameter: 24mm
Axis diameter: 2mm
Axis length: about 17mm
Voltage: 1.5v-6v

Rotating speed:
The no-load current is about 20ma at 3v voltage, the blocking current is about 270ma, and the speed is about 3500 per minute.
The no-load current is about 30ma at 6v voltage, the blocking current is about 500ma, and the speed is about 6800 per minute.
Installation: 2x M2 screws, hole distance 15mm
weight: about 27 Grams / Piece

Note:
Please allow 1-3mm errors due to manual measurement.
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

Package:
4x 310 Micro Gear Motor (Shaft 10mm/17mm optional)