| Quantity | 0-3 | 4-50 | 51-100 |
| Discount | 0% OFF | 5% OFF | 10% OFF |
| Price | US$ 9.20 | US$ 8.74 | US$ 8.28 |
Copy and share this link on social network or send it to your friends
Copy| Product Name | 35Mhz-4.4GHz N-type RF Power Meter V10 Spectrum Analyzer Display TYPE-C Communication -70~+30dbm Attenuator Power Detector EMC |
| Item NO. | F52276 |
| Weight | 2024 kg = 4462.1562 lb = 71394.4990 oz |
| Volume | 1 CBM |
| Category | Computer Accessories |
| Creation Time | 2024-05-23 |
Product Overview:
1.RF-Power-Meter-V10 series is a high performance and low cost portable
Type-C simple RF power meter (with spectrum display).
It provides 5V power supply and high speed data communication through TYPE-C.
Easy to use, compact size, portable, stable performance, high accuracy, presettable bias,
wide dynamic range, fast measurement speed.
The software that comes with the meter allows users to configure
the meter on a PC and makes data logging and sharing easy.
RF-Power-Meter-V10 RF power meter advantages:
1, support a variety of high-speed dynamic acquisition, support spectrum display,
can accurately measure the single frequency point RF power;
2, the highest support 4GHz RF signal acquisition function;
3, built-in digital programme-controlled attenuator (0-31.75DB),
with numerical control attenuator in the case of measuring the
maximum input power of 30dBm (1W), dynamic range: +30dBm to -70dBm.
4, RF power meter V10 comes with a 1.3-inch TFT LCD and built-in Li battery,
can be run offline (spectrum);
5, the use of 4-port air plug to provide TTL serial port read and write function.
6, the upper computer with 2 MARK cursor function,
easy to measure the modulation pulse width; automatically find the maximum value,
minimum value function.
7, RF input interface: N-type male.
8、Power on process: check whether the battery switch is in 0N position,
and then press the middle button of the panel.
9, shutdown process: long press the middle button shutdown.
Product applications:
1, RF instrumentation instrument calibration;
2, RF equipment testing and maintenance;
3, RF circuit VSWR measurement (join the feedback bridge);
4, RF circuit return loss measurement;
5, interference detection between wireless communication equipment;
6, RSSI (Received Signal Strength Indication) and transmit power level detection;
7, step attenuator performance evaluation;
8, amplifier gain and attenuation measurement of the network;
9, directional coupler in the forward power and reflected power measurement;
10, the power measurement of GSM signal using GMSK modulation;
Technical indicators:
1, the measurement of power range -70 ~ +30dBm (of which 0 to -40dbm has a very good linearity,
the input signal is greater than 0 to +30dbm,
you must set the internal CNC attenuator ATT = 30DB, OFFSET = +30DB
after the actual measurement of the measured power value is displayed;
2, measuring power resolution ± 0.1 dBm;
3、Measurement frequency range 35M~4.4GHz (the frequency range is different for different models);
4, input impedance: 50Ω;
5, dynamic range: 100dB;
6, operating voltage 5VDC (through the TYPE-C cable power supply);
7, charging current: 400mA ;
8, Size: 66 * 36 * 24mm (excluding the protruding N head, please refer to the mechanical drawing
for specific dimensions); The body is composed of a fully CNC machined aluminium alloy shell.
Weight less than 100g.
Packing list:
Aluminium alloy shell host *1
TYPE-C cable *1
Email：yxy@xt-xinte.com
Wechat:15012645226
No related record found