iFlight Force Mini VT5804 OSD FPV 5.8G 48CH Tramsmitter 25mW/100mW/200mW Switchable for FPV Racing Drone Quadcopter Item NO.: F25656

iFlight Force Mini VT5804 OSD FPV 5.8G 48CH Tramsmitter 25mW/100mW/200mW Switchable for FPV Racing Drone Quadcopter

iFlight Force mini VT5804 M3 hole

The 5.8Ghz, 48-channel dual receiver (including the racing frequency band) can automatically detect the signal strength and select the antenna signal with the strongest signal to receive. The transmission power is 6-speed switching 25mW/100mW/200mW.
The biggest feature is that the built-in OSD adjustment function (Flysh Protocol) makes the setting of the ground station very light and simple, no need to adjust the equipment, can be directly adjusted through the OSD, the settings include
PID, OSD, frequency band and channel, picture transmission power. The selection of frequency bands and channels is controlled by one button (you can automatically search for active channels), and the current channel can also be combined by LEDs.
To show. The socket has a set of video output interfaces, a set of RX signal interfaces, a set of 7-24V input ports, and a set of 5V output ports. Powerful, with 8 groups of E-group frequency and simultaneous use without interference;
The frequency lock is fast, the boot does not interfere with the companion; the quality is light, the volume is small, and the hole position of 30.5*30.5 is perfectly matched with the market. All the same size flight controllers are specially designed for image transmission.

Specifications:
– Supply voltage: DC 7-24V
– System: Automatic NTSC / PAL format
– Number of channels: 48 channels (including RaceBand racing frequency group, automatic save channel when power is off)
– Channel display: LED combination shows the current channel
– Channel selection: Start searching by long press of the button or select by OSD
– Interface: 6P line port
– Size: 20*20mm
– Weight: 2.8g

The main advantages:
1. 5.8G 48 frequency, including raceband frequency
2. High receiving sensitivity
3. Wide voltage input: 2S- 6S (7V-24V)
The new 5.8G receiver, 48-band, covers all frequency bands of mainstream products on the market.
4. Built-in OSD assistant function, fat shark agreement
5. Transmitting power 6-speed switching 0mW/25mW/100mW/200mW/400mW/600mW


Usage: Power the picture with 7-24V, connect the RX port of the picture to the flight control, take iFlight REVO Bee F4 as an example, the RX of the picture is connected to the RX6 port of the flight control, and the VIDOE is connected to the flight control. VIDEO out,
The remote control and receiver are paired, the receiver is connected to the flight control, set up and controlled by the remote control, then IRC Tramp is selected in the UART6 and Peripherals positions of the Ports interface.
Save, at this point, the wiring and tuning are set, then you can adjust the control by remote control, put the throttle stick in the middle, Yaw pushes to the far left, Pitch pushes to the top, at this time, the display device will play
Out of the debugging interface, Pitch up and down is selected, Yaw is about OK and exit, you can set including PID, OSD, frequency band and channel, map transmission power, set up, exit, you can fly.