Home>Consumer Electronics>XT-XINTE USB 2.0 to RS485 RS-485 RS422 RS-422 DB9 COM Serial Converter Adapter Cable FTDI Chip Industrial 400W Lightning Protection 70cm Dropship
XT-XINTE USB 2.0 to RS485 RS-485 RS422 RS-422 DB9 COM Serial Converter Adapter Cable FTDI Chip Industrial 400W Lightning Protection 70cm Dropship

XT-XINTE USB 2.0 to RS485 RS-485 RS422 RS-422 DB9 COM Serial Converter Adapter Cable FTDI Chip Industrial 400W Lightning Protection 70cm Dropship Item NO.: F33959

Write a Review
US$ 10.94
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name XT-XINTE USB 2.0 to RS485 RS-485 RS422 RS-422 DB9 COM Serial Converter Adapter Cable FTDI Chip Industrial 400W Lightning Protection 70cm Dropship
Item NO. F33959
Weight 0.105 kg = 0.2315 lb = 3.7038 oz
Category Consumer Electronics
Brand XT-XINTE
Creation Time 2019-11-19


XT-XINTE USB 2.0 to RS485 RS-485 RS422 RS-422 DB9 COM Serial Converter Adapter Cable FTDI Chip Industrial 400W Lightning Protection 70cm Dropship

Specific:
Brand: XT-XINTE
Serial Protocol: RS485 / RS422;
Specification: USB 2.0;  EIA/TIA RS485 and RS422 standard;
Chip: FTDI;
USB-bus powered, no external power needed.
Automatic hand-shaking protocol supported.
Item Length: 70cm
Weight: 90g

Feature:
USB2.0 to RS-485/RS422 industrial grade lightning protection high speed converter
Adopts British FTDI main chip; fully compatible with USB (Universal Serial Bus) Rev 2.0
Support RS-485/422 interface with 400W lightning protection
RS-422/485 interface DB9 pin connector
Data (TXD) automatic flow control, zero delay design
2Mbps or higher data transmission rate
Support automatic handshake protocol
Support remote wakeup and power management
The USB bus takes power directly and does not require an external power supply.
Support for Windows95/98/2000/XP/VISTA/WIN7/WIN8/WIN10/NT.IMAG

Important Note:
    The USB end must be connected to PC or Mac. Other USB devices like digital camera, scanner and printer is not allowed.
    To avoid reflections on longer cables it is necessary to use appropriate termination resitors (120Ω, 1/4W).
    Please do NOT connect the adapter to RS422/ RS485 device until you install the driver on your computer or Mac.

What is included?
    1 x USB to Serial Converter Cord 70cm
    1 x RS422 RS485 Serial DB9 to Terminal Block Adapter
    1 x Driver CD

4 Kinds of Working Modes: Asynchronous
     Point to point / four wires full duplex;
     Point to multiple point / four wires full duplex;
     Point to point / two wires half duplex;
     Point to multiple point / two wires half duplex.

Applications:
    Factory automation system
    Distributed control system
    LED INFO display equipment
    PLC control and management
    CNC management
    SCADA(Supervisory control and data acquisition)
    Medical treatment/medication automation
    Building automation
    Check on work attendance
    Human resource management.
    Measuring instruments and monitoring system
    Data collection


No related record found