Displayport Ribbon Extension Cable Male-Female Flat Metal Shielded FPC DP To DP V1.2 Adapter 90 Degree With Mount Bracket

DP to DP Flat Cable

Brand name: XT-XINTE

Product name:DP to DP Cable

Product model:DPP series

Transfer speed:support of increased bandwidth up to 32.4Gbps, HDR/DSC resolutions up to 8K @ 60 Hz

Wire length:15CM,30CM

Application: For Video card, Graphics card extension

Product specifications: support DP1.2 version, support HDR/DSC signal transmission

Rate: 1080P-240Hz, 2K-144/165Hz, 4K-60Hz

Audio transmission: 32 bit/1536kHz

Working temperature: -20°C ~ 80°C

Note: The extension cord does not support 2 transfers, that is, the signal will be attenuated if two or more DP lines are connected in series. Can not support full speed, need to reduce speed and frequency to normal use.

series Part-Number Description:

Adavantage: P5~P8 are silver wires. In addition to the use of EMI shielding conductive polymer, the differential signal uses aluminum foil metal shielding, and the wire with metal shielding has better anti-interference ability. Significantly reduce the problems such as splash screen and black screen

Product advantages:

Material advantages: use German patented imported wire, use high quality gold-plated connectors, high frequency support HDMI 2.0 stable transfer. PCB uses high-quality low-resistance high-quality materials, PCB workmanship precision, PCB uses high TG sheet, copper thickness is thickened to 1oz; connector gold-plated conductive performance, can reduce the black screen blue screen splash caused by increased oxidation rust resistance Flower screen problem.

Design advantages: differential signal without via design, no CAF micro short circuit phenomenon, high speed signal data transmission without parasitic capacitance and parasitic inductance signal attenuation interference problem, power circuit enhanced wiring design, PCB board miniaturization design, can reduce mechanism interference , no card hardware, product installation is easy.

Production advantage: Our factory direct sales, product customized production, welding at the metal welding point during production. And put on the heat-shrinkable tube protection, the product is firm and reliable, there will be no problem of disconnection and disconnection. The product works well, stable and reliable.

Q&A:

Is there any EMI shielding for Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Can wires and PCB connectors be split?

No, in order to purify the signal transmission and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

How compatible are wires?

Supports DP 1.2 / 1.4  high-speed, supports 8K/60hz full-speed. High compatibility.
The product uses high-definition screen 8K/60hz monitor, all of product test PASS 100% before shipping.

 

Cable thickness? Can it be bent?

The thickness of the wire is 1.4mm, and it can be bent and folded without affecting the use.

How many weights does the product have?

The weight of the wire 5cm is 1.57g. The weight of the connector and the PCB board is 7.45g (the specifications and models are numerous, for reference only)

The size of the blue and silver wire can be bent 90 degrees, the size is as shown in the figure below (it is recommended to choose the silver version to be thicker and safer)