Home>Consumer Electronics>Computer Accessories>Wire & Cable & Cord>XT-XINTE 1 to 10 Cooling Fan Hub Splitter LED Cable PWM 4Pin 12V Power Supply Speed Controller Adapter for Bitcoin Miner

XT-XINTE 1 to 10 Cooling Fan Hub Splitter LED Cable PWM 4Pin 12V Power Supply Speed Controller Adapter for Bitcoin Miner Item NO.: F29820

Sold (7)

US$ 1.91 ~ US$ 2.12

Quantity	0-3	4-50	51-100
Discount	0% OFF	5% OFF	10% OFF
Price	US$ 2.12	US$ 2.01	US$ 1.91

Quantity: Stock ( 9999992 )

Estimate Shipping Cost

Product Name	XT-XINTE 1 to 10 Cooling Fan Hub Splitter LED Cable PWM 4Pin 12V Power Supply Speed Controller Adapter for Bitcoin Miner
Item NO.	F29820
Weight	0.056 kg = 0.1235 lb = 1.9753 oz
Category	Consumer Electronics > Computer Accessories > Wire & Cable & Cord
Brand	XT-XINTE
Creation Time	2019-07-17

XT-XINTE 1 to 10 Cooling Fan Hub Splitter LED Cable PWM 4Pin 12V Power Supply Speed Controller Adapter for Bitcoin Miner

Brand: XT-XINTE

Colour: Black

Size: 70x40mm

Weight: 60g

1.Suitable for 12V motherboard 4pin/4pin fan. (3pwm fan can also be used, but plugged in is running at full speed, because 3pin fan has no pwm speed control function)

The power supply is a large 4P interface.

2.Expand the 10-bit fan 4-pin connector to solve the problem of insufficient motherboard interface and centralized processing of fan wires.

3.The pwm interface is connected to the motherboard cpu fan interface, the red is the cpu fan dedicated interface, and the black interface is the pwm conventional fan interface.

4.The power supply can be directly powered by the power supply, which can reduce the load pressure on the main board. The temperature control line pwm is separately connected from the main board, and the power supply temperature control is correct.

The hub pcb board has a 3M backing on the back for easy adhesion to flat areas.

Maximum current support, single channel must not exceed 1A, and the sum of 10 channels must not exceed 10A.

5.This product is a hub. The function is to expand the four-pin port of the motherboard to multiple ports. If your fan is a 3-pin fan, you can use it, but you can't adjust the speed of pwm. Because this is a hub, not a governor.

Product Include:

1 x large 4P interface hub

1 x 40cm cable