|
Copy and share this link on social network or send it to your friends
Copy| Product Name | USR-N510 H7-4 Version 1 Port RS485 Serial Device Server RS485 to Ethernet Converter Modbus RTU to Modbus TCP Support Virtual COM |
| Item NO. | F45064-D1--F45064-D4 F46024 F46024-D2 F46024-D3 |
| Weight | 0.6 kg = 1.3228 lb = 21.1644 oz |
| Category | Consumer Electronics > Computer Accessories |
| Brand | USR |
| Creation Time | 2022-01-06 |
| System Information | |
| Processor | ST Cortex-M7 |
| Basic Frequency | 400MHz |
| Flash | 128K+4M byte |
| Ethernet | |
| Port Number | 1 |
| Interface Standard | 8 pin RJ45 |
| Rate | 10/100 Mbps, MDI/MDIX, auto switch between cross and direct connection |
| Protection | 2KV electromagnetism isolation, shell insulation blocking |
| Network Protocol | IP,TCP,UDP,DHCP,DNS,HTTP,ARP,ICMP,Web socket,Httpd client |
| Receive Buffer | Max 16k bytes buffer |
| Serial | |
| Port Number | 1 |
| Interface Standard | RS-485: 2 wire (A+,B-) Half-Duplex |
| Data Bits | 7,8 |
| Stop Bit | 1,2 |
| Check Bit | Even,Odd |
| Baud Rate | 600bps ~ 921600Mbps |
| Flow Control | XON/XOFF |
| Buffer | Send and receive 4k bytes respectively |
| Protection | RS-485: anti-static 2KV,lightning protection |
| RS-485 Pull-up and Pull-Down Resistor | 2.2 KΩ |
| Software | |
| Virtual Serial（USR-VCOM） | Windows 2000 or higher(32 bit/64 bit) |
| Configuration | Built-in webpage, computer set-up software, serial command |
| Basic Parameter | |
| Size | 88 x 81 x 24 mm |
| Operating Temp. | -40 ~ 85°C (industry) |
| Storage Temp. | -40 ~ 85°C, 5 ~ 95% RH (no condensation) |
| Input Voltage | DC 5 ~ 36V |
| Working Current | 53mA @ 12V |
| Power | <1W |
Master chip adopts ST crotex-M7 core, the main frequency
is up to 400Mhz, fast processing speed,
high stable and reliable performance
Wide input voltage DC 5-36V,
with reverse polarity protection
Support modbus RTU and modbus TCP protocol conversion
Support modbus multi-host polling
The server listens to the specified port and waits for the TCP client to connect,
The data sent by the serial device will be
transparently transmitted to all successfully
connected clients through the serial device server.
The serial device server initiates a TCP connection to the specified IP address.
If the connection fails, the serial server will continue to try to reconnect until it succeeds.
If the connection is successful, the server can transparently transmit
data with the serial device in two-way.
The serial device server sends the data of the
serial device to the designated IP network device.
The serial device server monitors the port meanwhile and
forwards all received data to the serial device.
Serial port data can be submitted to a specified server by GET or POST method
Change the baud rate, data bit, check bit and stop bit dynamically via network protocol
When N510 is used as a TCP Client, it will automatically send a predetermined registration
package for identification after the link is established.The registration package data
can be IMEI code, ICCID code and custom registration data.
Network heartbeat packet: The serial device server sends a heartbeat packet regularly to notify
the server that it is active and maintains a normal network connection with the server.
Serial heartbeat packet: The serial device server notifies the serial device
it is active via packet, and this packet can also be used to actively capture sensor data.
N540 can connect the charging pile to the charging intelligent
service platform to realize two-way data transmission between
the charging device and the platform.The billing information
and power usage can be viewed remotely through the platform
to facilitate operation and maintenance.
he application of N540 in traditional industrial scenarios can
effectively solve the problem that workers need to monitor
equipment on-site, save labor costs, and increase production
efficiency and safety factors. Data management makes the
production process control more refined.
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found