Tarot 8CH Receiver Signal Conversion Module PWM/PPM/SBUS/DBUS/S-BUS/D-BUS/Pixhawk TL2981 for RC Multicopter Drone Quadcopter

Tarot 8CH Receiver Signal Conversion Module PWM/PPM/SBUS/DBUS/S-BUS/D-BUS/Pixhawk TL2981 for RC Multicopter Drone Quadcopter Item NO: F21756

US$ 10.26
Quantity:
Shipping Cost:
Estimate Shipping Cost
  • Tarot 8CH Receiver Signal Transfer Module PWM/PPM/SBUS/DBUS/S-BUS/D-BUS/Pixhawk TL2981 for Multicopter
Specifications
Product Name Tarot 8CH Receiver Signal Conversion Module PWM/PPM/SBUS/DBUS/S-BUS/D-BUS/Pixhawk TL2981 for RC Multicopter Drone Quadcopter
Item NO F21756
Weight 0.0440 kg = 0.0970 lb = 1.5521 oz
Category DIY RC Drone Kit / RC Drone Accessories > Tarot
Tag
Brand Tarot
Creation time 2017-08-01

Detail
Tarot 8CH Receiver Signal Transfer Module PWM/PPM/SBUS/DBUS/S-BUS/D-BUS/Pixhawk TL2981 for Multicopter
 
 
 
 
 
 
 
1
 
Product description :
 
 
8-channel remote control receiver signal conversion module using 32-bit MCU to collect signals and conversion, the input signal automatically identified, without Manual switching.
 
  1, enter the normal receiver signal, PPM and S.BUS signal output 
  2, enter the PPM signal, PWM and S.BUS signal output 
  3, enter the S.BUS signal, PWM and PPM signal output 
 
     With this signal converter, you can put the DJI wizard in the ordinary receiver and remote control, and not necessarily have to use DJI original remote control (ordinary remote control PWM signal into the wizard with the SBUS signal).
 
    With this signal converter, you can use the DJI Wizard's remote control on an ordinary plane (the wizard's remote control receiver's SBUS signal is converted to a normal PWM signal for ordinary ESC and Servo)
 
    With this signal converter, you can convert the PPM signal (coaching interface) of a normal remote control to a PWM signal (equivalent to a wired receiver, converted to a normal PWM signal for use with a normal ESC and Servo)

 

2

 

Connect Wire instructions:
 
 
1-8 channel for the PWM signal input or output Port ;
The 9th channel is PPM, SBUS input or PPM output Port;
Channel 10 for PPM or SBUS output Port ,
 
The input signal is automatically recognized without manual switching.
 
1. When  1CH-8CH  that PWM signal is input to any one or several ,  9 channel will output the PPM signal and the 10 channel will output the SBUS signal (the indicator flash 1 time)
2. When 9-channel input PPM signal, 1 - 8 channel PWM signal output , 10 channel  SBUS signal output (indicator light flash 2 times)
3. When the 9-channel input SBUS signal, 1 - 8 channel PWM signal output , 10 channel PPM signal  output (indicator light flash 3 times )
 
 
 
Product Specifications:
 
8CH receiver signal conversion × 1 (26 × 24MM)
 

No related record found