Home>Rebate Big Discount>SSD to SATA3 Adapter Expansion Card Adapter SSD to SATA3 for MacbookAir 2010 2011
SSD to SATA3 Adapter Expansion Card Adapter SSD to SATA3 for MacbookAir 2010 2011

SSD to SATA3 Adapter Expansion Card Adapter SSD to SATA3 for MacbookAir 2010 2011 Item NO.: F17163

Write a Review
US$ 1.86
US$ 3.71 Save US$ 1.86 (50% Off)
Customized Requirements
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name SSD to SATA3 Adapter Expansion Card Adapter SSD to SATA3 for MacbookAir 2010 2011
Item NO. F17163
Weight 0.0605 kg = 0.1334 lb = 2.1341 oz
Category Rebate Big Discount
Brand XT-XINTE
Creation Time 2017-07-25

SSD to SATA3 Adapter Expansion Card Adapter SSD to SATA3 for MacbookAir 2010 2011


Description:


1.Only fits models below:
 
2010  AIR A1370 A1369 MC503 MC504 MC505 MC506
 
2011  AIR A1370 A1369 MC968 MC969 MC965 MC966
 
 
2. only for MacBook Air 2010-2011 edition of the built-in blade hard drive(if not Apple SSD blades can'tuse), the riser card with plug prevent SSD to prevent 2012 AIR SSD insert features!
 
3. Please confirm your air SSD Goldfinger is a 6+12 interface, or you can contact us to confirm.
4. test: each riser card will boot into system run HD Tune Pro version to viewtheir health status, also runs CrystalDisMark, its speed is normal, ensure that the interposer card without any problems!
 

Product features:
 

1. the original slot, with SSD preventing incorrect insertion, and invert function. Design a card position, reverse plug inserted into, insert   can   work  without  the  alignment   position .
 
Never   because  of  improper   operation   SSD  or  the  riser   card   are   burned out !

2. fully consistent with regular SATA hard drive SATA power and data outlets
 
3. strict compliance with SATA data cable specification, as long as strict spacewith a complete formation and shielding.
 
4. Bottom of riser card all ground wires ,   without   any   other   signal   cable   and   power   cord ,   transfer   Kaping  can   be   placed   on   your hard drive,  or   optical drive .   ( But   not   connected  to  other   source )
 
5. the onboard 3.3V voltage converter circuit, three-terminal regulator + tantalum capacitor filter, enough with 256G AIRSSD, compatible with any power SATA interface.
 
6.Onboard there is large area of copper foil on heatsink, AIR SSD work more stable.
 
7. equipped with SSD and SSD locking screws fixed screw nut.
 
8. install the mounting hole spacing meets the chassis, easily installed in the optical drive or hard disk location.




Packing List:


 

1*MAC AIR SSD card
1* locking SSD M3 screws, nuts, spring washers
1* installation screw set.
 

aeProduct.getSubject()

aeProduct.getSubject()

aeProduct.getSubject()

No related record found