PULUZ PULUZ PU3017 3.5mm Professional Audio Stereo Recoding Interview Microphone ABS for DV DSLR Camera
PULUZ PU3017 3.5mm Professional Audio Stereo Recoding Interview Microphone ABS for DV DSLR Camera

PULUZ PU3017 3.5mm Professional Audio Stereo Recoding Interview Microphone ABS for DV DSLR Camera Item NO: Q24921

US$ 10.09 (15% Off)
US$ 11.87 Save US$ 1.78
Shipping Cost:
Estimate Shipping Cost
Quantity:
  • PULUZ PU3017 3.5mm Professional Audio Stereo Recoding Interview Microphone ABS for DSLR Camera​
  • Product Information
  • 1. The microphone can be fixed on the camera device through the hot boot interface. The MS Stereo system can achieve natural pickup tones.
  • Delivers stereo sound with excellent sharpness.
  • 2. Pick tone mode (affect speaker width) can be set to 90 or 120 according to sound.
  • 3. Applicable to any equipment with 3.5mm mic sockets and Hot boots.
  • 4. Frequency response: 30-15000hz.
  • 5. Sensitivity: -40db +-2dB (1KHZ 0dB = 1v/pa). 6. Note: When you switch off to on , the LEDs will blink and then go off to conserve power. LEDs are blinking for a long time or always flashing during use. means not enough power. )
Specifications
Product Name PULUZ PU3017 3.5mm Professional Audio Stereo Recoding Interview Microphone ABS for DV DSLR Camera
Item NO Q24921
Weight 0.1573 Kg
Category Camera stablizer (Gimbal) > Camera Accessory
Tag
Brand PULUZ
Creation time 2018-06-04

Detail

PULUZ PU3017 3.5mm Professional Audio Stereo Recoding Interview Microphone ABS for DSLR Camera

Product Information

1. The microphone can be fixed on the camera device through the hot boot interface. The MS Stereo system can achieve natural pickup tones.
Delivers stereo sound with excellent sharpness.
2. Pick tone mode (affect speaker width) can be set to 90 or 120 according to sound.
3. Applicable to any equipment with 3.5mm mic sockets and Hot boots.
4. Frequency response: 30-15000hz.
5. Sensitivity: -40db +-2dB (1KHZ 0dB = 1v/pa). 6. Note: When you switch "off" to "on", the LEDs will blink and then go off to conserve power. LEDs are blinking for a long time or always flashing during use. means not enough power. )


No related record found

You May Also Like