|
Copy and share this link on social network or send it to your friends
Copy| Product Name | Mantis 85 Micro FPV Racing Drone RTF With Flysky FSI6 Remote Control Super_S F4 Flight controller built-in Betaflight OSD |
| Item NO. | F23184-H |
| Weight | 1.177 kg = 2.5948 lb = 41.5175 oz |
| Category | DIY RC Drone Accessories > Motor |
| Brand | Happymodel |
| Creation Time | 2017-11-30 |
Mantis 85 Micro FPV Racing Drone RTF With Flysky FSI6 Remote Control Super_S F4 Flight controller built-in Betaflight OSD
Specifications:
Item Name:Mantis 85 Micro FPV RACING DRONES BNF
Size:100mm*100mm*25mm
Weight: 52g( battery not include)
Flight controller: Super_S F4 Flight controller built-in Betaflight OSD
Motor: Happymodel SE1102 KV9000 brushless motor
Propeller: 1935 3-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Battery: 7.4V 400mah 30C lipo battery
OSD: Betaflight OSD
Firmware of Flight controller :Betaflight 3.2.0
Flight time : 4minutes
Buzzer Ready
Receiver :
-Flysky 8ch AFHDS 2A receiver
Flight controller Specification:
-Size:20mm*20mm*5mm
-Mount hole: 16mm*16mm
-Processor: STM32F405RGT6 MCU
-Sensor: SPI Sensor MPU6000
-Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
-Firmware version: Betaflight 3.2.0 Dshot
-Target: OmnibusF4SD
ESC specification:
-Size:25mm*29mm*5mm
-Mount hole: 16mm*16mm
-Firmware version: BLHELI_S 16.5
- BB2, 48MHZ Chip
-Lipo Battery: 1-2S
-Con. Current: 6A
-Peak Current: 10A (5S)
-BEC: No
-Programming: YES
-Betaflight passtrough ready
-Dshot600 ready(Default)
-Support oneshot42 oneshot125 Multishot Dshot
Features:
- 3K full carbon fiber bottom plate set up with CNC aluminum alloy Stiffeners
- Extremely light and more powerful
- STM32F405RGT6 MCU+ BLHELI_S ESC make your Operating feel more stabile and silky
- Adjustable Angle of Camera
- Jaw-dropping flight performance
- Betaflight support
- Acro mode / Air mode /Angle mode support
- Built-in OSD(Using F4 MCU controls OSD over SPI bus in DMA mode)
- OSD Configuration has been include in BETAFLIGHT GUI
- Radio Stick to control PID Tunes
- BLEHELI_S pass-through ready
- Telemetry RSSI Output ready
Package include:
1 x Happymodel Mantis 85 Frame kit
1 x Super_s F4 Flight controller build-in Betaflight OSD
1 x Flysky AFHDS2A Receiver
4 x Happymodel SE 1102 KV9000 brushless motor
1 x Super_S BS06D 4 in 1 ESC Dshot600
4 x 1935 3-blades propeller CW
4 x 1935 3-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8g 25MW 48CH NTSC/PAL VTX with Raceband
1 x 7.4V 400mah 30C lipo battery
1 x Buzzer
Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter Radio System for RC Heli Glider Quadcopter DIY Drone
(Mode1 right throttle/Mode2 left throttle for choose.Please inform us which one you need in advance,thanks
Description:
The
Flysky FS-i6 is a affordable, 6CH 2.4G radio system and also a very
simple setup for your RC vehicle. The automatic frequency hopping
digital system provides a strong, reliable 2.4GHz signal, so rest
assured you'll always be in control. Included in the package is a
6-channel mini receiver that will fit in most vehicles. The ergonomic
feel of the trasnsmitter will feel good in your hands even after long
track sessions.
Features:
Reliable, interference free 2.4GHz AFHDS 2A signal operation.
6CH operation.
Use only 4 * AA batteries for transmitter.
Quick and extremely stable in performance.
Simple binding procedure.
Highlights:
Works in the frequency range of 2.405 to
2.475GHz.This band has been divided into 142 independent channels,each
radio system uses 16 different channels and 160 different types of
hopping algorithm.Silm design on transmitter for easy handling!
This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission
Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.
This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.
AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.
AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.
Transmitter Specfications:
Channels: 6
Model type: fixed-wing/glider/helicopter
RF range: 2.405-2.475GHz
Bandwidth: 500KHz
Band: 142
RF power: less than 20dBm
2.4G system: AFHDS 2A and AFHDS
Code type: GFSK
Sensitivity: 1024
Low voltage warning: less than 4.2V
DSC port: PS2; output: PPM
Charger port: no
ANT length: 26mm * 2(dual antenna)
Power: 6V 1.5AA * 4 (Not included)
Display mode: Transflective STN positive type,
128 * 64 dot matrix VA72 * 39mm, white backlight.
Size:174 * 89 * 190mm
Weight: 392g
Online update: yes
Color: black
Package list:
1 * FS-i6 transmitter （Transmitter only,does not include receiver)
1 * Bind plug
1 * CD
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found