M.2 WiFi A.E Key to Mini-pcie mPCI-E Extension Cable PCIe 4.0 X1 Riser Card for Wireless Network Card Stable Transmission

Brand: XT-XINTE

Product model: R56SF 4.0

Product name: M.2 key A.E to mini-pcie cable

Wire length: 3-100cm (support wire length customization, if you need other lengths, please contact us to change the price, thank you!)

Speed bandwidth: PCIe 4.0x1

Product function: Connect to the M.2 WiFi A.E. interface of the motherboard through the mini-pcie wireless network card extension cable.

Purchase restriction: only designated by professional engineers for purchase, general purpose is not suitable and cannot be used, ordinary buyers do not purchase.

Procurement Tips: Be sure to buy 1~2 samples first, and then buy them in bulk after testing and verifying that they are correct.

Friendly reminder: There are many compatibility problems with this product. Incorrect assembly or improper operation will burn your equipment. Only designated by professional engineers to purchase. This product is a customized product and is not refundable or exchangeable. Please consider and confirm clearly before placing an order.

Length description: The length of the wire refers to the part of the wire, excluding the PCB and the connector.

Product advantages:

1. Cable advantage, using high-speed cables, supports PCIe 3.0 full-speed stable transmission.

2. Cable length advantage, from 3 cm to 1 meter can be customized, the adapter sold in our shop, the cable impedance is low, the cable length within 60 cm supports PCIe4.0 full speed.

3. Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there will be no CAF micro short circuit phenomenon, and the product is durable

4. The product is made of high-quality materials, the PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. Stable at full speed, no speed reduction required, and no compatibility issues.

5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding point, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.

6. The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.