Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat

Copy and share this link on social network or send it to your friends

Copy

Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat Item NO: F27384-F27385

US$ 109.00
Mode:
Mode1 Right Throttle Mode2 Left Throttle
Remark:
Customized Requirements
Quantity:
Shipping Cost:
Free Shipping
  • Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat
Product Name Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat
Item NO F27384-F27385
Weight 0.4 kg = 0.8818 lb = 14.1096 oz
Category DIY RC Drone Kit / RC Drone Accessories > Remote Control
Brand Jumper
Creation time 2019-01-23

Jumper T12 PLUS Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module With HALL Gimbal for RC Drone Car Boat

Radio Specification: 
Brand Name: Jumper 
Module: T12 Plus 
Radio MCU: STM32F205VET6 ( 512kb ) 
Working voltage: DC5 - DC9V 
( factory with 4 x AA battery box, 2s Lipo recommended, batteries not included ) 
Firmware: JumperTX ( an open source Firmware set based on the OpenTX Project ) 
Channels: up to 16 channel output 
Display: 1.7 - inch LCD display, 128 x 64 resolution 
Gimbal Type: HALL Sensor 
JR / FrSKY compatible module bay on rear side 
Upgrade method: USB online upgrade 
Simulator mode: 3.5mm standard ppm output or USB HID 
Voice support: YES 
JP4 - in - 1 RF Module Specification: 
Working Voltage: 6 - 9V 
Working Vurrent: 100ma and less 
Operating Frequency: 2.4G ISM band 
RF Power: +22DBM 
Main Control Chip: STM32F103CBT6 ( 128K ROM, 20K RAM ) 
Module bay compatibility: FRSky, Jr and other dimensions: 64 x 49 x 33 ( without antenna ) 
Net Weight: 42g ( including antenna ) 
Software Compatibility: Suitable for radios using OpenTX or er9x / ersky9x 
Firmware updatable: Yes, via USB. 
Features: 
Open source multi - protocol firmware, Based on Open TX 
JR / FrSKY compatible module bay on rear side. 
USB online firmware upgrade 
Ultra-low power consumption, longer battery life 
Up to 16 channels of output ( depending on the receiver ) 
Open Source Firmware, all channels are fully programmable 
Wide voltage input ( 2s lipo recommended ) 
Multilingual menu 
Vibration reminder function 
Support telemetry ( depending on the receiver ) 
Carry Case included 
Crossfire CSRF Compatible: Yes 
LUA Script support: Yes


No related record found

You May Also Like