Copy and share this link on social network or send it to your friends
CopyProduct Name | JMT P1-GYRO Fixed Wing Flight Controller Drone 3-axis Gyroscope Balance Wing For FPV Flying Wing RC Airplane |
Item NO. | F33613 |
Weight | 0.028 kg = 0.0617 lb = 0.9877 oz |
Category | DIY RC Drone Accessories > Flight Control |
Brand | JMT |
Creation Time | 2019-11-05 |
JMT P1-GYRO Fixed Wing Flight Controller Drone 3-axis Gyroscope Balance Wing For FPV Flying Wing RC Airplane
P1-GYRO Product Introduction:
Volume: 26 *39MM
weight: about 6 g.
Working voltage: 3.5-6V
P1-GYRO product introduction Based on the A3 three-axis stabilization, the flight control switch control mode and the three-axis lock (AVCS) mode are added. This mode uses the angle vector control algorithm to offset the angle of the aircraft around the three motion axes. Real-time detection and correction, so that the aircraft has the ability and trend to always maintain the attitude of the last moment, so it is called locking, locking compared with the ordinary stabilization mode, the locking mode can not only greatly improve flight stability, and even in the unmanned In the case of manipulation (out of control), it is possible to achieve high-level operations such as autonomous cranes and side flying. The P1-GYRO product introduction adds a switch channel for switching modes during flight. You can use a 3-segment switch between the three modes of normal stabilization, three-axis locking (AVCS) and gyroscope off. Switch and experience a completely different flight fun.Sensitive debugging is recommended to minimize the feeling of the first flight. Press the range of 5 minutes each time to make the flight test adjustment. The factory setting of the flight control board is 50%. Please do not set the factory as the standard. Please refer to your The aircraft and power configuration adjust the appropriate sensitivity.
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found