|
| Quantity | 0-3 | 4-50 | 51-100 |
| Discount | 0% OFF | 5% OFF | 10% OFF |
| Price | US$ 22.46 | US$ 21.34 | US$ 20.22 |
Copy and share this link on social network or send it to your friends
Copy| Product Name | Holybro PM06 V2-14S Power Module 2S-14S5.2V For Aircraft Flight Controller Accessories |
| Item NO. | F48712 |
| Weight | 0.035 kg = 0.0772 lb = 1.2346 oz |
| Category | DIY RC Drone Accessories |
| Brand | Holybro |
| Creation Time | 2022-10-26 |
Holybro PM06 V2-14S Power Module 2S-14S5.2V For Aircraft Flight Controller Accessories
PM06 V2-14S Power Module
Description:
This PM06 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption
and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated power
distribution for 4 ESCs. It comes with pre-soldered wires, capacitor, and XT60 connector.
Technical Specification：
Input voltage: 2S-14S
PCB Cont. Current Rating: 70A
PCB Burst Current Rating: 120A (<60 Sec)
Output: DC 5.2V & 3A Max (Note: To ensure proper heat dissipation, UBEC output current needs to be limited to
<2A when using 14S battery.)
Voltage Divider: 18.182
Amperes per Volt: 36.364
Please Note:
- The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst
current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed
accordingly. You can refer to this chart for reference.
- This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital
PM like PM02D).
Mechanical Specification:
Dimensions: 35x35x5mm
Mounting hole: 30.5mm*30.5mm
Weight: 24g
Pin Map:
Package Include：
1x Power Module
1x 80mm XT60 connector wire (pre-soldered)
1x Electrolytic capacitor: 220uF 63V (pre-soldered)
1x JST GH 6pin cable
Email：yxy@xt-xinte.com
Wechat:15012645226
No related record found