HolyBro Kakute-F4 V2.4 Stacks MPU6000 F4 Flight Controller Tekko32 F4 50A /60A / 65A 4in1 ESC Atlatl HV V2 VTX for FPV Drone

Description:

The Holybro Kakute F4 V2.4 Flight Controller includes plug-and-play for DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash , 5V and 9V/3A BEC, easy soldering layout and much more.
The Kakute F4 V2.4 is for DJI HD ready. It has an easy plug-and-play port with an on-board 9V/A regulator designed to power your HD video transmitter like for DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers

Specification: 

• MCU - STM32F405

• IMU - MPU6000

• Barometer - BMP280

• OSD - AT7456E

• 5x UARTs (1,3,4,4,6,7)

• 128 Mbit Dataflash chip 

• Battery input voltage: 2S-8S
  

• BEC 9V/3A - Optimized for DJI O3 Air unit

• BEC 5V/2A 

• 7x PWM Outputs (6 Motor Output, 1 LED)

• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).

• Mounting - 30 x 30mm, Φ4mm hole with M3 Grommets

• Dimension - 37x37mm

• Weight – 7g

• JST-SH1.0_8pin port (For 4in1 ESCs)

• JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX) 

Manual & Pin Diagram

Package Includes:

1x  Kakute F4 V2

4x  Anti-Vibration Silicone Grommet Insert *4

1x  JST SH 6pin to JST GHR 8pin 80mm &150mm cable (for DJI/Caddx HD System)

1x  JST SH 6pin 100mm cable(for Caddx HD Systems)

1x  JST SH 8pin 100mm cable(for ESCs)

The Holybro Kakute F4 V2.4 Flight Controller includes plug-and-play for DJI O3 HD camera plug, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging capability with built-in flash , 5V and 9V/3A BEC, easy soldering layout and much more.
The Kakute F4 V2.4 is for DJI HD ready. It has an easy plug-and-play port with an on-board 9V/A regulator designed to power your HD video transmitter like DJI O3 Air Unit & Caddx Vista while supporting analog system. It has 5x dedicated UART ports with built-in inversion for peripherals. It is also ready for autonomous flight with the on-board barometer. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers

Kakute F4 v2.4 Specification: 

• MCU -STM32F405

• IMU - MPU6000

• Barometer - BMP280

• OSD - AT7456E

• 5x UARTs (1,3,4,4,6,7)

• 128 Mbit Dataflash chip 

• Battery input voltage: 2S-8S
  

• BEC 9V/3A - Optimized for DJI O3 Air unit

• BEC 5V/2A 

• 7x PWM Outputs (6 Motor Output, 1 LED)

• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).

• Mounting - 30 x 30mm, Φ4mm hole with M3 Grommets

• Dimension - 37x37mm

• Weight – 7g

• JST-SH1.0_8pin port (For 4in1 ESCs)

• JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX) 

Tekko32 F4 4in1 50A ESC

Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30

Features:

• New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)

• PWM Frequency: 16k to 96k

• Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Tekko32 F4 4in1 60A ESC

Fast F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30x30

Features:

• New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)

• PWM Frequency: 16k to 96k

• Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Tekko32 F4 Metal 4in1 65A ESC 

F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / BLHELI32
Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.

Features:

• New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)

• PWM Frequency: 16k to 96k
• Metal-cased MOSFET for excellent heat dissipation
• Massive on-board capacitance for noise filtering at 2068uf
• 3 oz copper PCB design to allow bigger current and better heat dissipation
• Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.

Atlatl HV V2

Features

• Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc.
• Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband.
• SmartAudio input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more.
• All parameters are controllable via push-button on the side of the unit, for cases where SmartAudio is not used.
• MMCX connector is durable and easy to use. Rated for 100’s of mating cycles. Easy and quick antenna changes. No more ripped-off UFL connectors.
• LED indicators for channel, band, and power. Allows easy check of vTX parameters simply by glancing at the quad.
• Variable transmit power from 25 mW to 800 mW. Use 25 mW for a race and then easily switch to 800 mW for freestyle.
• 0.5 mW True Pit Mode allows you to power up safely without the risk of knocking other pilots out of the air.
• Built in microphone, so you can listen to your motors while you fly, no matter how far away you fly.
• Standard 36mm form factor allows you to mount the Atlatl directly on your flight controller stack.

Kakute F4 v2.4 Manual & Pin Diagram

Package Includes: