Home>DIY RC Drone Accessories>Mobula7 Upgrade Parts>Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro Whoop Mobula 7 FPV Racing Drone RTF w/ CADDX Turtle V2 HD FPV Mini Camera T8S Remote Controller

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro Whoop Mobula 7 FPV Racing Drone RTF w/ CADDX Turtle V2 HD FPV Mini Camera T8S Remote Controller Item NO.: F31668-K

Name: Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro Whoop Mobula 7 FPV Racing Drone RTF w/ CADDX Turtle V2 HD FPV Mini Camera T8S Remote Controller
Brand: Happymodel
SKU: F31668-K
Price: 164.93 USD
Availability: SoldOut

Write a Review

US$ 164.93

US$ 194.03 Save US$ 29.10 (15% Off)

Sold Out

Product Name	Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro Whoop Mobula 7 FPV Racing Drone RTF w/ CADDX Turtle V2 HD FPV Mini Camera T8S Remote Controller
Item NO.	F31668-K
Weight	0.9 kg = 1.9842 lb = 31.7466 oz
Category	DIY RC Drone Accessories > Mobula7 Upgrade Parts
Brand	Happymodel
Creation Time	2019-10-16

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro Whoop Mobula 7 FPV Racing Drone RTF w/ CADDX Turtle V2 HD FPV Mini Camera T8S Remote Controller

Specifications:
Brand Name: Happymodel
Item Name: Mobula7 HD 2-3S 75mm Brushless whoop drone
Wheelbase: 75mm
Size: 98mm*98mm*45mm
Weight: 48g(without battery)
Weight:72g(with Original 3s 300mah Lipo battery )

Features:
New Crazybee F4 PRO V2.0 AIO Flight controller 1-3s Lipo Compatible
2S for indoor Cine whoop mode
3S for outdoor Freestyle whoop mode
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
The lightest 1102 brushless motor only 2.7g with double ball bearings
Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output
Caddx turtle v2 + 1080p 60fps DVR ready
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..
Full telemetry function ready (Frsky Non-EU and Flysky version support)
Special Breath light ready
Real Bind and Fly version
Compatible both for 2s-3s Lipo/LIHV

Package includes:
1xMobula7 V3 Frame
1xCrazybee F4 V2.0 PRO FC
4xEX1102 KV10000 Motor
1x40mm propeller(4cw+4ccw)
1xCaddx Turtle v2+1080p 60fps DVR
1x5.8G 40ch 25mw-200mw VTX
1x3S 11.4v 300mah 30C/60C battery
1xPropeller disassemble tool
1xScrewdriver
1xRadiolink T8S Remote Controller

Spare parts specifications:

Motor

Mode: EX1102 KV10000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):1S-3S

Flight controller

(Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V2.0 Firmware target: CrazybeeF4FS
(DSM2/DSMX version) CRAZYBEE F4DX PRO V2.0 Firmware target: CrazybeeF4DX
(No RX version) CRAZYBEE F4 PRO V2.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
Onboard 4in1 ESC
MCU upgraded to EFM8BB21

Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
DSM2/DSMX receiver version
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
PNP No RX version
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc.

VTX

Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready
Weight: 3g
CADDX Turtle V2
Image sensor: 1/2.7" CMOS sensor
Horizontal: 800TVL
TV system: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
Power Input: DC 4.5-20V
FPV FOV: 155°
Recording FOV: 170°
Mini Illumination: 0.01lux
Image Resolution: 2 Megapixels
Lens: 1.8mm Turbo Eye Lens
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MP4
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)
Color: Red

Lipo Battery
Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 23g

Connector: XT30