Full Speed Eaglet-85 Carbon Fiber Brushless Traversing Machine PNP + Compatible DSM/X Receiver + 2S 500AMH Battery DIY FPV Camera Micro Brushless Racing Quadcopter Drone
Kindly Note: The Frame Kit not include any Electronic Spare
parts, Unassembly Kit.
PNP Include 1x 2S 500AMH Battery, But no Charger. Not include the Transmitter. Assembly Set.
Frame Kit (Picture reference, Product do not include the Flight controller)
Brand Name: JMT
Item name:Eaglet-85 FPV Racing Frame
Wheel base: 85mm
Material: Carbon fiber, PLA+TPU
Weight: about 22g
Size: 113mm * 113mm * 52mm; Protection plate Thickness: 1.5mm; Buttom Plate Thickness: 2mm
Recommend flight components: 2S Power; 20*20 Flight Controller; 11 Series Motor
Note: This is the frame only, package doesn't include other components needed for flight
Assembly Set Specification:
Item name: Eaglet-85 FPV Racing Drone
Product number:950085
Wheelbase: 85mm
Size:113mm * 113mm * 52mm
Weight: about 60g (without battery)
Motor:1104 7800KV brushless motor
ESC: 10A BLHELI_S 16.5 2-3S 4in 1 ESC Dshot600Propeller: 56mm 2-blade propeller
Camera: 600TVL camera with 25MW 48CH NTSC/PAL vedio transmitter
Flight controller: Minicube Betaflight F3 6DOF built-in OSD
OSD: Betaflight OSD
Firmware of FC: Betaflight 3.1
Flight time: 3-5 mins
Buzzer: 13*13mm (with LED)
Battery: 7.4V 500mah 50C lipo battery
Minicube F3 6DOF flight controller:
Size:27mm * 27mm * 5mm
Mount hole:20mm * 20mm
Processor:STM32 F303 MCU
Sensor:SPI sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Artificial Horizon, Fly mode, Flytime, Craft name etz.)
Firmware version:OmnibusF3 Betaflight 3.1 Dshot
Minicube 10A BLHELI_S 4 in 1 ESC Dshot600:
Size:27mm * 27mm * 5mm
Mount hole:20mm * 20mm
Firmware version:BLHELI_S 16.5
BB2,48MHZ chip
Lipo Battery:2-3S
Con. Current:10A
Peak Current:15A(10S)
BEC:5V 1A
Programming:Yes
Betaflight passtrough ready
Dshot600 ready(Default)
Support onehot42 onehot125 Multishot Dshot
Damped light on
Features:
Streamlined desigh
Props protection
Light frame
STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
Adjustable Angle of camera
Figure transmitting antenna protection
Support Cleanflight / Betaflight firmware
Acro mode / Air mode /Angle mode support
Built-in OSD,Through BETAFLIGHT regulate OSD information
Can adjust the PID parameters by remote control
BLHELI_S electronic speed controller firmware
Support telemetry RSSI return
Eaglet-85 COMBO:
1 x Eaglet-85 Frame kit
1 x Betaflight F3 6DOF flight controller build-in OSD
4 x 1104 7800KV brushless motor
1 x Minicube 10A BLHELI_S 16.5 2-3S 4 in 1 ESC Dshot600
2 x 48mm 5-blades propeller(CW)
2 x 48mm 5-blades propeller(CCW)
1 x vm275t 25mw 48CH fpv camera
1 x 7.4V 500mah 50C LIPO battery
1* Receiver (DSM-X/Flysky/Frsky/WFLY optional)
Package size:15*15*5cm
Package weight:130g
Note: Frame kit not include any electronic parts.
No related record found