Copy and share this link on social network or send it to your friends
Copy| Product Name | Full Set DIY Mobula 7 V3 FPV Drone Accessories Crazybee F4 PRO FC V3 Frame VTX SE0802 Motor Turbo Eos2 Camera for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75 |
| Item NO. | F27293-A/F27293-B/F27293-C/F27293-D |
| Weight | 0.2 kg = 0.4409 lb = 7.0548 oz |
| Category | DIY RC Drone Accessories > Mobula7 Upgrade Parts |
| Brand | Happymodel |
| Creation Time | 2019-01-11 |
Full Set DIY Mobula 7 V3 FPV Drone Accessories Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75
If someone need us to weld the flight control with camera, VTX,buzzer and so on,please buy this service together,the Welding fee 5usd per set
https://www.xt-xinte.com/h-product-detail.html?goods_id=569833
Flight controller
CRAZYBEE F4 PRO Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
ESC MCU Upgraded to EFM8BB21
Built-in Betaflight OSD (SPI Control)
Built-in Current meter sensor Max up to 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Multi Serial port support
Fully compatible with almost Brushless whoop drone
Weight:4.2g
Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
Receiver support
No RX version :
support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
Built-in
DSM2/DSMX receiver Version:
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Built-in
Frsky NON-EU receiver Version:
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Built-in
Flysky receiver Version:
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
Features:
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
- New Crazybee F4 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
Package include:
1x Mobula 7 4-blade props Blue (4pcs/set)
1x Mobula 7 4-blade props Black (4pcs/set)
1x Mobula 7 4-blade props Green (4pcs/set)
1x Mobula 7 4-blade props Pink (4pcs/set)
1xMobula7 V3 Frame (White)
4 or 2 xSE0802 1-2S CW Motor with Red Cable(16000kv )
4 or 2 xSE0802 1-2S CCW Motor with Black Cable(16000kv)
1xCrazybee F4 PRO Flight control
1xMobula7 V2 Canopy
1xBattery Holder
1x(Caddx.us)Turbo Eos2 Camera 2.1mm 4:3 NTSC (If you need other version,please inform us in advance)
4xMobula7 3.8V 300mah Battery
1xMobula7 3.7V 3.8V 1S06 6-Way Charger
1xBuzzer
1X5.8g 40ch 25mw~200mw switchable VTX
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found