Home>DIY RC Drone Accessories>Receiver>Frsky R9 Slim+ OTA 6/16CH Telemetry RC Mini Receiver Optimized 900MHz Long Range with 2 Detachable Antennas

Frsky R9 Slim+ OTA 6/16CH Telemetry RC Mini Receiver Optimized 900MHz Long Range with 2 Detachable Antennas Item NO.: F32211 F32212

Name: Frsky R9 Slim+ OTA 6/16CH Telemetry RC Mini Receiver Optimized 900MHz Long Range with 2 Detachable Antennas
Brand: FrSky
SKU: F32211 F32212
Price: 29.38 USD
Availability: InStock

Write a Review Sold (10)

US$ 29.38

US$ 34.56 Save US$ 5.18 (15% Off)

Version: 915MHz 868MHz

Quantity: Stock ( 9999995 )

Estimate Shipping Cost

Add to Cart

Product Name	Frsky R9 Slim+ OTA 6/16CH Telemetry RC Mini Receiver Optimized 900MHz Long Range with 2 Detachable Antennas
Item NO.	F32211 F32212
Weight	0.023 kg = 0.0507 lb = 0.8113 oz
Category	DIY RC Drone Accessories > Receiver
Brand	FrSky
Creation Time	2019-09-25

Frsky R9 Slim+ OTA 6/16CH Telemetry RC Mini Receiver Optimized 900MHz Long Range with 2 Detachable Antennas

The 900MHz series receiver R9 Slim+ OTA uses the ACCESS protocol.
Further optimization of performance based on R9 Slim+ reduces latency and increases transfer rate.
The R9 Slim+ OTA receiver not only supports the wireless firmware upgrade function, but also detects the firmware version information of the receiver.

The R9 Slim+ OTA uses a receive dual antenna design to increase signal strength. The design is streamlined,
And support 6 channel PWM signal output. At the same time, R9 Slim+ OTA also supports reverse SBUS
And reverse S.Port signal output, extending the flexibility of the use of external devices.

Specification:

Number of Channels:

Non-LBT Version: 6/16CH (Telemetry)

LBT Version: 6/16CH (Telemetry) / 6/16CH (No Telemetry)

With RSSI Output : Analog 0~3.3V
Operating Voltage Range: DC 3.5V~12.6V(1-3s Li-Battery)
Operating Range: Up to 10km or above
Dimension: 32*13.5*5mm (L × W × H)
Weight: 4.3g (with antennas)

Feature:
915MHz (Non-EU Version)/ 868MHz(EU Version)
ACCESS protocol and support OTA function
Low latency and high precision
Support S.Port / F.Port data backhaul (can be set in OpenTX/FrOS)
Support reverse S.Port and reverse SBUS signal output
Support battery voltage detection
Removable antenna design