FEICHAO Keel135 DIY RC Drone Kit PNP BNF RTF 135mm Carbon Fiber Frame F411 20A AIO 2S-5S BLHELI_ S ESC FE200T VTX 1204 5000KV Motors 1200TVL FPV Camera
Note：
There are 14 options (7 versions, 2 colors) , pls see the corresponding picture and choose the version you need.
Functions and features
135mm wheelbase carbon fiber frame
Life time is about 6 minutes
Betaflight version F4 flight control
Support voltage 2-4S
Frame
Name:Keel135 Frame Kit for 3inch blades
Brand: FEICHAO
Wheelbase: 135mm
Weight: 53g
Material: carbon fiber + 3D printing
Color: red/black
Flight control mounting hole distance: 20*20mm, 25.5*25.5mm
Applicable motor: 1104-1506
Applicable blade: 3inch
Camera installation size: 14mm
Paddle
Type: 3016
Pitch: 1.6 inches
Material: PC
Weight/g: 1.18g
Inner diameter of center hole: three holes / 1.5mm
Maximum support width: 8.84 mm
ESC and flight control integrated
Flight control parameters:
CPU: STM32F411CEU6
IMU: MPU6000
OSD: AT7456E
Barometer: BMP280
LED: Support WS2812 and other programmable
Sensor: Built-in current sensor
Firmware version: betaflight_4.1.1_MATEKF411
Receiver: for Frsky/ Futaba/ Flysky/ TBS Crossfire/ DSM-X: DSM-2 receiver
ESC parameters:
Firmware support: BLHELI_ S
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-5S Lipo
Continuous current: 20A
Peak current: 25
Firmware version: BLHELI _S (G- H-30)
Motor
Specifications: 1204
KV option: KV5000
Configuration: 9N12P
Stator diameter: 12mm
Stator length: 4mm
Inner shaft diameter: Φ2mm
Outer shaft diameter: Φ1.5mm
Motor size (diameter * lens): Φ15mm* 16.2mm
Weight (g): 5.9g
Support voltage: 2-4S
VTX
1. Input voltage: DC 4.5-5.2V
2. Input current: 200MW = 400ma
3. Power switch: three gears 25MW, 100MW, 200MW
4. Signal channels: 40
5. Frequency switching: manual button / OSD (IRC Tramp) (support at the same time)
6. Antenna interface: IPEX
7. Size: 16.5MM * 16.5MM
Camera
Model: Caddx Ant Nano FPV Camera
Horizontal resolution: 1200TVL
Lens: 1.8 mm
Voltage: 3.7-18V
Net weight: 2g
Installation size: 14mm or 19mm
Package incuded:
1x Keel135 135mm carbon fiber Frame
1x screw accessory kit
1x Black or Red camera mount (Optional)
2 Pairs 3016 Three holes 1.5mm Props
4x MT1204 5000kv Motors
1x F411 20A AIO 2S-5S BLHELI_ S ESC
1x FE200T VTX
1x 1200 TVL FPV Camera
1x Buzzer
1x Cable organizer
1x FS-RX2A Pro or FD800 receiver (Optional)
1x Flysky i6 or FEICHAO LiteRadio remote control (Optional)
1x IMAXRC B3 pro charger (Optional)
1x 650mAh 3S 80C 11.4V lithium battery (Optional)
1x LST-009 3 inch 5.8G 40CH FPV Google (Optional)
Note:
1 Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become invalid). The battery cannot be powered off immediately after it is fully charged. Charge for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then close the remote control to prevent accidents.
4. This product is not a toy and is not suitable for children under 14 years of age.
5. If you are a beginner, it is recommended to be assisted by an experienced adult
6. Novices should pay attention not to take the airplane by hand or let children take it to prevent it from being scratched.
7. Please turn off the start switch in time when the aircraft falls from a high altitude or hits other objects during flight, otherwise it may cause damage to the flight control motor, etc. Check whether the aircraft is damaged or the screws are loose.
Q&A
Please refer to our pictures to select the desired combination. All parts are sold separately in our shop, and you can add them as spare parts. If you have any questions, please feel free to contact us.
No related record found