Home>Camera Accessory>Diving Buoyancy Kit>For GoPro13 FEICHAO DSLR Diving Dual Handheld Tray Bracket with Clip Screw Adapter Top Handle Shutter Extension Sports Camera Underwater Photography
For GoPro13 FEICHAO DSLR Diving Dual Handheld Tray Bracket with Clip Screw Adapter Top Handle Shutter Extension Sports Camera Underwater Photography

For GoPro13 FEICHAO DSLR Diving Dual Handheld Tray Bracket with Clip Screw Adapter Top Handle Shutter Extension Sports Camera Underwater Photography Item NO.: KF31197-C D E F G H

Write a Review
US$ 30.32
US$ 35.67 Save US$ 5.35 (15% Off)
Version
Red handheld Red Kit C Red Kit D Red Kit E Red Kit F Red Kit G Red Kit H
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name For GoPro13 FEICHAO DSLR Diving Dual Handheld Tray Bracket with Clip Screw Adapter Top Handle Shutter Extension Sports Camera Underwater Photography
Item NO. KF31197-C D E F G H
Weight 0.915 kg = 2.0172 lb = 32.2757 oz
Category Camera Accessory > Diving Buoyancy Kit
Brand FEICHAO
Creation Time 2020-08-01

For GoPro13 FEICHAO Aluminum Alloy Dual Handheld Diving Adjustable Bracket Kit for GOPRO for DJI and other sports cameras, micro-single, SLR camera waterproof case, including Canon, Sony, Nikon, Panasonic, Olympus etc..
 
 
Many options, please choose the one you want, contact me if any problems.
 
 
Product gross weight: about 655g, net weight about 590g
Packing size: 280*66*66mm
Product material: aluminum alloy + stainless steel + silicone
 
Color: black and red. (support custom, has MOQ)
 
Minimum outer dimensions of the product: 278*195*55mm
Product outer dimension width stretching range: 278~385mm
 
Dual handheld installation board size: 220*55mm;
Designed with a vertical and horizontal mounting slot to secure the waterproof case or camera;
 
The size of the waterproof case can be installed:
the maximum distance between the two fixing screw holes is 166mm wide, so the mounting screw hole of the waterproof case must be smaller than 166mm.
One screw hole also can be installed.
 
 
This dual-handheld is optimized on the basis of the previous generation products, modified the shortcomings of the previous products, and then gave the professional enthusiasts the experience feedback, and further modified the dual-handed diving photography accessories.
 
 
Features:
  1. The handles on both sides of the product are hollowed out, which not only reduces the weight, but also plays a key role in the comfort and slip resistance of the grip;
The handle is designed into a two-step structure according to the comfort of the human hand, so that when the handle is held by the hand, the index finger is on the first step, the middle finger and the little finger are on the second step, and there is neither a cutting hand nor a natural grip;
When you hold it hard, you can fully appreciate the fullness of your hands, and the force acts on the handle;
The handle height is also relatively high to 130mm, so that the hand will not be squeezed in a small space; there is a one-inch ball head above the handle, the ball head can expand the equipment according to their needs, such as fill light, Extension arm, buoyancy lamp arm, etc.;
 
  2. The link between the two hand-held mounting plates and the handle is a card slot pull type, which is locked by an M5 screw, and the length of the single side stretch is 53 mm;
The purpose of the card slot drawing is that when there are heavy objects on the platform, the two card slots and the M5 screw can be lifted in a 3-point manner, so that it can withstand heavier weight without damage;
In use, it is only necessary to tighten a screw to adjust;
 
  3. The dual-hand-held mounting plate is designed with a vertical and horizontal mounting slot for camera housing accessories. The four horizontal slots on the board can be mounted on the front or the back as needed, adapting to different specifications of the camera equipment, with the shutter extension r od.
There are two M5 screw holes on one end of the board. If the customer is worried that the left and right screws are not tight, you can install two screws.
 
SIZE 1SIZE(1)0001标注(1)自然饱和度 2IMG_8831IMG_8832000IMG_0121
IMG_0114
 

2-open-hole clips:

Enhances the use limit of the butterfly clip
It is made of aluminum alloy hollow and lighter in weight, which makes the installation more convenient
It adopts 304 stainless steel screw spring, wide and large handle makes it easier to rotate easily without hurting the hand
The all-aluminum alloy uses high-end sandblasting combined with anodized surface treatment, the visual effect is more refined, and the hand feel is more delicate

Details: 
Material:6061 Aluminum 
Size:55.5mm*24.9mm*57.8mm 
Weight:44.6g 

Feature: 
Two-hole Butterfly Clip, enhances the use limit of the butterfly clip.
It is made of aluminum alloy hollow and lighter in weight, which makes the installation more convenient.
It adopts 304 stainless steel screw spring, wide and large handle makes it easier to rotate easily without hurting the hand.
The all-aluminum alloy uses high-end sandblasting combined with anodized surface treatment, the visual effect is more refined, and the hand feel is more delicate.


IMG_9200IMG_9212IMG_9613IMG_5656KF31197-GIMG_5626



with 2 close holes double layer clips: IMG_1587IMG_1596IMG_9613 - 副本IMG_5657

IMG_5616IMG_5619KF31197-FKF31197-HIMG_8191

 
IMG_0603KF27869-AIMG_0628KF27869-BIMG_8196IMG_1963IMG_0629IMG_0630SIZE 1SIZE(1)(BGNING)标注a)002000IMG_0141IMG_0158SIZE1(1)000(1)IMG_0697(1)IMG_0694000 (2)(1)000(1)IMG_0759(1)IMG_0775000(1)IMG_075422222(1)1111(1)

No related record found