Home>DIY RC Drone Accessories>Mobula7 Upgrade Parts>Basic Version Full Set DIY Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75
Basic Version Full Set DIY Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75

Basic Version Full Set DIY Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75 Item NO.: F27293-Q/F27293-R/F27293-S/F27293-T/F27293-U/F27293-V/F27293-W/X

5.0
(1)
Write a Review
US$ 82.48
US$ 97.04 Save US$ 14.56 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • Basic Version Full Set DIY Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75
Product Name Basic Version Full Set DIY Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75
Item NO. F27293-Q/F27293-R/F27293-S/F27293-T/F27293-U/F27293-V/F27293-W/X
Weight 0.2 kg = 0.4409 lb = 7.0548 oz
Category DIY RC Drone Accessories > Mobula7 Upgrade Parts
Brand Happymodel
Creation Time 2019-01-17

Basic Version Full Set DIY Mobula 7 V3 FPV Drone Accessories Combo Crazybee F4 PRO FC V3 Frame SE0802 Motor Turbo Eos2 Camera VTX for Mobula7 75mm Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75

If someone need us to weld the flight control with camera, VTX,buzzer and so on,please buy this service together,the Welding fee 5usd per set

https://www.xt-xinte.com/h-product-detail.html?goods_id=569833

Flight controller

CRAZYBEE F4 PRO Firmware target: CrazybeeF4DX

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM

Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

ESC MCU Upgraded to EFM8BB21

Built-in Betaflight OSD (SPI Control)

Built-in Current meter sensor Max up to 28A

Current meter scale set to 1175

Built-in 5V 1A Buck / Boost with LC filter

Built-in voltage detection

BLHELI_S pass-through Ready

Multi Serial port support

Fully compatible with almost Brushless whoop drone

Weight:4.2g

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Receiver support

No RX version :

support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.

Built-in

DSM2/DSMX receiver Version:

Serial bus receiver

Protocol: DSM2/DSMX compatible

Channels:6-9 (Depend on your radio)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Built-in

Frsky NON-EU receiver Version:

SPI BUS receiver

Frsky D8/D16 switchable

Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

                               Built-in

Flysky receiver Version:

SPI BUS receiver

Protocol: AFHDS and AFHDS-2A Switchable

Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Failsafe support

Features:
- New Crazybee F4 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter

Package include:

1x Mobula 7 4-blade props Blue (4pcs/set)

1x Mobula 7 4-blade props Black (4pcs/set)

1x Mobula 7 4-blade props Green (4pcs/set)

1x Mobula 7 4-blade props Pink (4pcs/set)

1xMobula7 V3 Frame (White)

2 xSE0802 1-2S CW Motor with Red Cable(19000kv or 16000KV Optional)

xSE0802 1-2S CCW Motor with Black Cable(19000kv or 16000KV Optional)

1xCrazybee F4 PRO Flight control

1xMobula7 V2 Canopy

1xBattery Holder

1x(Caddx.us)Turbo Eos2 Camera 2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

4xMobula7 3.8V 300mah Battery

1xMobula7 3.7V 3.8V 1S06 1-Way Charger

1xBuzzer

1X5.8g 40ch 25mw~200mw switchable VTX








2019-05-11

C****s

I really live this kit.
Easy assembly und good quality