BETAFPV P1 HD VRX (Nano) – ArtLynk HD FPV Receiver Module with Mini HDMI-Compatible Output and SD Card Recording for P1 Air Unit and FPV Goggles

BETAFPV P1 HD VRX (Nano) – ArtLynk HD FPV Receiver Module with Mini HDMI-Compatible Output and SD Card Recording for P1 Air Unit and FPV Goggles

The P1 HD VRX (Nano) Beta Test samples are currently out of stock. All existing orders will be shipped as soon as possible. Thank you for your 
participation – we greatly appreciate your support and look forward to your invaluable feedback. Stay tuned for the final version! Also in beta – the 
Matrix 1S AIO P1 HD FC. Check it out for more information.
Important: The P1 HD VRX Nano Beta samples supports 2–4S batteries only. 6S batteries are prohibited and may cause damage.
The P1 HD VRX (Nano) is a compact digital video receiver compatible with the ArtLynk Protocol, designed to bring crystal-clear HD FPV to your existing Fat 
Shark and SKYZONE goggles without adding unnecessary bulk. Simply connect it via the mini HDMI port to Fat Shark or SKYZONE goggles and enjoy a stunning 
1080p@60fps live feed with low latency and reliable 400m+ range. With multi-band switching for interference-free video and a plug-and-play design, the P1 HD 
VRX Nano is the most affordable way to upgrade your FPV experience to digital HD.

Bullet Points
Compact, lightweight design – easy to install and carry
Compatible with Fat Shark & SKYZONE goggles via mini HDMI
1080p@60fps smooth video · 400m+ reliable range
Multi-band switching for interference-free flying
Affordable digital HD upgrade – no full system replacement needed
Specifications
Dimensions (antenna excluded): 39*62*36mm (Fat Shark compatible version), 32*64*36mm (SKYZONE compatible version)
Weight (antenna excluded): 36g (Fat Shark compatible version), 33g (SKYZONE compatible version)
SD card slot: Support max 1TB
Frequency: 5.3-5.8GHz
Effective Isotropic Radiated Power (EIRP): <23dBm (FCC), <14dBm (CE)
Ports: Type-C, mini HDMI, micro SD card slot, 2Pin PH2.0 connector
Antenna connector: RP-SMA Female (external thread, inner hole)
Transmission resolution: 1080p@60fps
Bitrate: 25Mbps
Transmission range: ＞400m
Input voltage: 5.5-26.4V
Diagram
Fat Shark compatible version:

SKYZONE compatible version:

Compact & Lightweight
Designed to be unobtrusive on your existing goggles, the P1 HD VRX (Nano) is small, lightweight, and perfectly balanced for comfortable, long-duration 
flying. No extra weight. No bulky hardware. Just crisp, clear HD video – fly as long as you like.

Note: For the SKYZONE-compatible version, the final VRX unit can be powered directly via the goggles – no separate power connection required. To enable 
this feature, you will need to update your goggles to the latest firmware version.
Fat Shark & SKYZONE Compatible
Available in two case sizes, the P1 HD VRX (Nano) is compatible with most Fat Shark (39×62×36mm) and SKYZONE (32×64×36mm) FPV goggles. Simply connect 
via the mini HDMI port to upgrade your existing goggles to a digital receiver – no need to invest in expensive digital goggles. It's the most affordable 
way to experience HD FPV with your current setup.

Fat Shark compatible goggle models：AttitudeV6, HDO+, HDO2, HDO

SKYZONE compatible goggle models：SKY04L, SKY04X, SKY04O, SKY04X PRO, SKY04O PRO

Smooth, Reliable Video Transmission
The P1 HD VRX supports 1080p@60fps video transmission with a stable 400m+ range and low latency for a smooth, immersive flying experience. Operating 
across the 5.3–5.8GHz frequency range, it allows you to switch channels to avoid interference, ensuring optimal transmission range and image quality 
even in crowded RF environments.
Know More About ArtLynk Protocol
The ArtLynk protocol is a low-latency, long-range communication protocol for drones, offering superior stability and range over traditional analog VTX.
 ArtLynk protocol enables real-time HD video at about 60ms latency from glass to glass, which is crucial for smooth flight control and high-quality FPV 
(First Person View). Here are the key features you may want to know.
Artosyn Inside & KAP Supported: ArtLynk protocol uses the Artosyn's latest AR803X chipset, with core technology support provided by KAP (KAP company 
provides core technology support or product solution to all FPV companies and ensures compatibility for various FPV products using Artosyn chipsets).
Collaborative and Open Community: ArtLynk protocol is a collaborative FPV ecosystem not belonging to ONLY one company. Many FPV enterprises and teams 
would design and produce their own products based on the ArtLynk protocol, ensuring broad compatibility and fostering community.
The ArtLynk protocol supports the following devices, letting you customize your own build or simply bind and fly:
BETAFPV P1 Air Unit, VR04 HD Goggles, Aquila20 P1, Meteor75 Pro P1, Monitor, P1 HD VRX (Standard), P1 HD VRX (Nano) [Beta Test], Matrix 1S AIO 
P1 HD FC [Beta Test]
HGLRC Draco
TJRC VTX, XJRC XJ3D Goggles, XJRC 02L Goggles
More coming soon!

File
Firmware for P1 HD VRX (Nano)
User Manual
Package
1 * P1 HD VRX (Nano) (SKYZONE / Fat Shark compatible version)
2 * 5.8G Antenna
1 * Power Cable
1 * Mini HDMI Cable
2 * Cable Organizer