Home>DIY RC Drone Accessories>Receiver>BETAFPV LiteModule RF Module with BEECORE Lite Brushed Flight Control Silverware Firmware Compatible with Bayang Protocol Radio Transmitter

BETAFPV LiteModule RF Module with BEECORE Lite Brushed Flight Control Silverware Firmware Compatible with Bayang Protocol Radio Transmitter Item NO.: F24993-A

US$ 12.97 ~ US$ 14.41

Quantity	0-3	4-50	51-100
Discount	0% OFF	5% OFF	10% OFF
Price	US$ 14.41	US$ 13.69	US$ 12.97

Sold Out

Product Name	BETAFPV LiteModule RF Module with BEECORE Lite Brushed Flight Control Silverware Firmware Compatible with Bayang Protocol Radio Transmitter
Item NO.	F24993-A
Weight	0.19 kg = 0.4189 lb = 6.7021 oz
Category	DIY RC Drone Accessories > Receiver
Creation Time	2020-04-20

BETAFPV LiteModule RF Module with BEECORE Lite Brushed Flight Control Silverware Firmware Compatible with Bayang Protocol Radio Transmitter like Frsky X9D/X9D Plus/X12S, Flysky TH9X, Turnigy 9XR/9XR PRO

ETAFPV LiteModule RF Multiprotocol TX Module for Bayang Protocol For Frsky X9D/X9D Plus/X12S Flysky TH9X 9XR/9XR PRO

SPECIFICATION

Item: LiteModule RF Module

Signal frequency: 2400-2483.5Mhz

Controllable range: > 300m

Input voltage: 6V-13.5V

Supported radio transmitter: Frsky X9D/X9D Plus/X12S, Flysky TH9X, Turnigy 9XR/9XR PRO

Supported channel order: AETR

Supported toy: Bayang protocol

BINDING PROCEDURE

Here use the Frsky Taranis X9D Plus for example.

1. Creat a model in OpenTX using external module in PPM mode, 12 channels and AETR sequence order.

2. Turn off Frsky Taranis X9D Plus.

3. Power up the drone. Wait for it in the binding status.

4. Power up. Hold BOTH sticks DOWN and to the LEFT for 3 seconds. The blue LED is flashing slow indicates that the module is in binding status. When bind successfully, the blue LED would be in solid on. Now you could control your drone.

*5. If you re-power your drone, like change the battery, you need to restart the LiteModule to re-do the binding procedure. Hold left stick DOWN and to the RIGHT, right stick DOWN and to the LEFT for 3 seconds to restart the LiteModule.

Note:

This Multiprotocol TX Module only supports remote control of AETR remote control channel order. Optimal system is Opentx/ER9X. But JR and TAER remote control channel order is not available now .

PACKAGE

1 * LiteModule RF Module (Bayang Protocol)

1 * Whip Antenna

Brushed Flight Controller Board Built in Bayang protocol for Tiny Bwhoop For Inductrix Frame RC Quadcopter

SPECIFICATIONS:
ESC: All FETs are rated at 12A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm, fully compatible with the For Inductrix quad frame and mounting pattern
Power Cable: 50mm, with JST-PH 2.0 connector,

Features:
Support level mode and acro mode. Also it has the ability to change settings for custom builds, or to adapt to personal preferences by stick gestures.
Designed to work with current Tiny Whoop For Inductrix frames
Built in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module
The flight controller board comes pre-flashed with Silverware firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.

Compatible radio transmitter:
BETAFPV TX01 radio transmitter
Radio transmitter of toy drone like JJRC H67, Eachine E011 etc, that using the Bayang protocol
Jumper T8SG radio transmitter
MTX9D multiprotocol module (Suit for Frsky Tanaris QX7 X9D X9D Plus X12S, Flysky TH9X, Turnigy 9XR/9XR PRO)
MTXI6 multiprotocol module(Suit for Flysky i6, i6S, I6X, I10)
Other 4in1 multiprotocol module that support the Bayang protocol