BETAFPV HX115 115mm HD 3-4S Freestyle Ripper Toothpick Quadcopter Drone with customized RunCam Split 3 Nano Camera 1105 5000KV Motor
HX115 HD 3-4S Freestyle Ripper, the first toothpick Quad with customized RunCam Split 3 Nano Camera in the world had come, which can shoot 1080P video at 60FPS good for capturing special moments in your fly life. It features Toothpick 12A AIO FC and 1105 5000KV motor, experience the unparalleled boost in power and performance on this 115mm toothpick class drone. For those of you who want to rip in the backyard or blasting through the sky, this beast is for you.
Specification
Weight: 74.3g (without battery)
FC&ESC:Toothpick F4 2-4S AIO FC
Motors: 1105 5000KV Brushless Motors
Props: HQ 3020 2-Blade Props / HQ 3030 3-Blade Props
Camera: Runcam Split 3 Nano
VTX: A01 25-200mW 5.8G VTX
Frame: HX115 carbon fiber frame
Canopy: Canopy for HX115
Receiver Option: Frsky XM / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Battery: 450mAh 3S Battery / 450mAh 4S Battery
Flight time: Almost 5mins
FC
CPU: STM32F411CEU6 (100MHZ)
Six-Axis: MPU6000 (SPI connection)
Size: 32.5*32.5mm (26.5mm mounting holes)
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Build-in BetaFlight OSD (OSD chip: AT7456E)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver.
Support programmable LED like WS2812 etc
Built-in current sensor
Weight: 6.2g(Without Pins), 6.5g(Pins Pre-solder)
ESC
Support BLheli/BLHELI_S suite Pass-through ready
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-4S Lipo
Continue current: 12A
Peak current: 15A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G-C
Motor Connectors: 1.25mm header pins connector
Factory firmware: G-H-30-16.7
Camera
1080P/60fps HD recording & WDR FPV camera
Super WDR FPV image with low latency (40ms)
Power-off protection for video files
Simultaneous HD recording and FPV output
Reduced TV-OUT interference
Strengthened ribbon cable
Replaceable lens(confirm)
Wide voltage range (5-20v)
Recommend Battery
Power combination suggestion is that use 3030 props with 450mAh 3S battery and 3020 props with 450mAh 4S battery, switchable and affordable.
Note:We NOT recommend that 3030 props combine with 4s battery, it may burn your motor.
Package
1 * HX115 115mm HD Quad
1 * HQ 3030 3-Blade Props (4pcs)
1 * HQ 3020 2-Blade Props (4pcs)
1 * Runcam OSD board and cable
1 * Set of M2 screws
*Battery is NOT included. It comes with two sets of 3'' props without pre-installed, props at your disposal.
No related record found