ADT-Link RTX3090 Graphics Card Extension Cable PCIe 4.0 x16 To x1 Riser Card A/N Cards Gen4 PCI-E4 Riser Cable For BTC Miner Item NO.: F44261-B1 F44261-B2 F44261-B3 F44261-B4

ADT-Link RTX3090 Graphics Card Extension Cable PCIe 4.0 x16 To x1 Riser Card A/N Cards Gen4 PCI-E4 Riser Cable For BTC Miner

Brand: ADT-Link

Product model: R13SC-WK 4.0

Product name: PCI-E 4.0 x16 to x1 graphics card extension cable

Bandwidth speed: PCIe 4.0x1 gen4; 16G/bps (Max.)

Adapted graphics card: RTX3090 RX6800xt, supports PCIE4.0 graphics card

Restrictions on use: The product is only for professional engineers, not supported by ordinary users, and not supported by old equipment 3 years ago. PCIe4.0 has high requirements on the equipment. As long as the extension cable is connected, the signal will be attenuated. This product does not guarantee PCIE4.0 full speed. If the equipment is aging, the signal is poor or the environment is not good, please use it at a lower speed.

Friendly reminder: There are many compatibility problems with this product, and there are technical problems in extending the graphics card externally or privately modifying it. Experienced engineers are required to operate and use it. Incorrect assembly or improper operation will burn your equipment. Non-professional engineers are prohibited from using it.

Cable length description: The cable length refers to the part of the visible cable, excluding PCB and connectors.

Product advantages:

1. Cable advantage, using ADT self-developed and designed cables, using high-quality PCIe connectors, high-frequency support for PCIe 4.0 16G/bps stable transmission. The BIOS does not need to adjust the speed, the core wire contains the power supply, and the extension cable of the mining motherboard can be used without an external power supply, and the graphics card can be used directly.

2. This adapter cable has low wire impedance, and the cable length within 60cm can stably support PCIe4.0 full speed.

3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB is made of high TG plates. The thickness of the copper material is thickened to 1oz. The content of gold finger gold plated 10u is the same level as that of the graphics card. The gold-plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increased resistance of oxidation and rust. The thick copper thickness can meet the PCIe high power consumption problem of mining graphics cards, and the product is durable.