ADT-Link Mini-PCIe To USB2.0 Adatper For 3G/4G/5G/LTE WWAN Card With SIM Dual Card Slot High Speed mPCIE To USB 2.0 Riser Card Item NO.: F43550 F43551 F43552

ADT-Link Mini-PCIe To USB2.0 Adatper For 3G/4G/5G/LTE WWAN Card With SIM Dual Card Slot High Speed mPCIE To USB 2.0 Riser CardWS17：

Product name: mini-PCIe to USB 2.0 adapter card

Working voltage: 3.0~4.6V (default 3.5V); 3A/4A (normal/peak current)

Product specification: 3G/4G/5G/LTE mPCIe module is transferred to the USB2.0 port of the computer

Product use: mini-PCIe supports the transfer test purpose of full-height or half-height WWAN modules

Restrictions on use: This product is specially designed for unit equipment testing and use. It is not suitable for civilian use and is not easy to use for general purposes.this product is a test product and can only be purchased by professional engineers. Please confirm the specifications before placing an order.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Product advantages:

Material advantage: high-quality gold-plated connectors are used, and high frequency supports USB3.0 stable transmission.the PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB is made of high TG plates.the thickness of the copper material is thickened to 1oz. The gold-plated connector has good conductivity, which can reduce the disconnection caused by the in crease of oxidation and rust resistance Problems such as slow freezing.

Design advantages: Differential signal enhanced layout design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference, power circuit enhanced wiring design, PCB board miniaturization design, can reduce mechanism interference, It is easy to install the product without the card hardware. The adapter board does not require a driver (the software driver of the network card must be installed) dual SIM card slot design, dual LED indicator design, does not support SIM hot plugging, adding  a discharge circuit design to reduce the failure rate, and a pad at the bottom of the adapter board The sheet protection product is sturdy and durable.

WS16：

Product name: mini-PCIe to USB 3.0 adapter card

Working voltage: 3.0~4.6V (default 3.5V); 3A/4A (normal/peak current)

Product specifications: 3G/4G/5G/LTE mPCIe module is transferred to the USB3.0 port of the computer

Product use: mini-PCIe supports the transfer test purpose of full-height or half-height WWAN modules

Restrictions on use: This product is specially designed for unit equipment testing. It is not suitable for civilian use. It is not easy to use for general purposes.This product is a test product and can only be purchased by professional engineers. Please confirm the specifications before placing an order.This adapter board only supports USB3.0 modules, not USB2.0 modules. Please confirm the specifications before placing an order.

EC20 is not supported. For EC20 users, please choose USB2.0 adapter board.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Product advantages:

Material advantage: high-quality gold-plated connectors are used, and high frequency supports USB3.0 stable transmission. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB is made of high TG plates. The thickness of the copper material is thickened to 1oz; the  connector is gold-plated and has good conductivity, which can reduce the disconnection and speed reduction caused by the increase of oxidation and rust resistance. Problems such as slow freezing.

Design advantages: Differential signal enhanced layout design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference, power circuit enhanced wiring design, PCB board miniaturization design, can reduce mechanism interference, It is easy to install the product without the card hardware. The adapter board does not require a driver (the software driver of the network card must be installed) dual SIM card slot design, dual LED indicator design, does not support SIM hot plugging, adding a discharge circuit design to reduce the failure rate, and a pad at the bottom of the adapter board The sheet protection product is sturdy and durable.

WS15：

Product name: M.2 NGFF Key B to USB 3.0 adapter card

Working voltage: 3.0~4.6V (default 3.7V); 3A/4A (normal/peak current)

Product specifications: 3G/4G/5G/LTE M.2 NGFF key B module is transferred to the USB3.0 port of the computer

Product use: M.2 key B, supports the transfer test of the WWAN module with a size of 3042 or 3052.

Restrictions on use: This product is specially designed for unit equipment testing. It is not suitable for civilian use. It is not easy to use for general purposes.This product is a test product and can only be purchased by professional engineers. Please confirm the specifications before placing an order.

Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.

Product advantages:

Material advantage: high-quality gold-plated connectors are used, and high frequency supports USB3.0 stable transmission. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB is made of high TG plates. The thickness of the copper material is thickened to 1oz; the connector is gold-plated and has good conductivity, which can reduce the disconnection and speed reduction caused by the increase of oxidation and rust  resistance. Problems such as slow freezing.

Design advantages: Differential signal enhanced layout design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference, power circuit enhanced wiring design, PCB board miniaturization design, can reduce mechanis  interference, It is easy to install the product without the card hardware. The adapter board does not require a driver (the software driver of the network card must be installed) dual SIM card slot design, dual LED indicator design, support SIM hoplugging, additional discharge circuit design to reduce the failure rate, and a gasket at the bottom of the adapter board The protection product is sturdy and durable.