| Quantity | 0-3 | 4-50 | 51-100 |
| Discount | 0% OFF | 5% OFF | 10% OFF |
| Price | US$ 4.21 | US$ 4.00 | US$ 3.79 |
Copy and share this link on social network or send it to your friends
Copy| Product Name | ADT-Link Micro USB To Micro USB 90 Degree Adapter USB OTG 2.0 Cable 15cm FPC Ribbon Flat USB Micro 2.0 OTG FPV Cable 3A |
| Item NO. | F41379 F41380 F41381 F41382 F41383 F41384 |
| Weight | 0.021 kg = 0.0463 lb = 0.7408 oz |
| Category | Consumer Electronics > Computer Accessories > Wire & Cable & Cord |
| Brand | ADT-Link |
| Creation Time | 2020-10-26 |
Brand: ADT-Link
Colour: Black
Size: 15cm
Quantity: 1 piece
Product model: UWW series products
Product name: USB 2.0 Micro-B to Micro-B OTG adapter cable
Wire length: 0.03m-3m (support length customization, if you need other lengths, please contact us to change the price, thank you!)
Adaptation range: micro-B to micro-B male connector at both ends
Speed bandwidth: USB 2.0 standard 480M/bps high speed
Current capacity: 3A (measured to support 3A within 50cm, 1.5A within 1 meter)
Product application: From the end microUSB 2.0 hard disk box, camera and other devices to the micro motherboard, Raspberry Pi, mobile phone micro-B 2.0 port
Description of wire length:
The length of the cable refers to the part of the visible cable, excluding PCB and connectors.
Purchase restriction: This product is designed to connect a micro-USB device to the micru-USB port of the computer motherboard. It is not suitable for general external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. The structure of this product is fragile and fragile, not suitable for civilian use, not easy to use for general purposes, and does not support return and exchange. Please consider carefully before placing an order.
Procurement Tips: Be sure to buy 1~2 samples first, and then purchase in bulk after testing and verification.
Application Tips: The default two ends support OTG welding ID, if you want to connect both ends of the extension cord to the Host motherboard, the extension cord needs to distinguish between the master and slave ends, please contact customer service for customization.
Product advantages:
Material advantages: use German patented imported wire, use high-quality gold-plated connectors, high-frequency support USB 2.0 stable transmission. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of high-quality materials. The PCB uses high-TG plates. The thickness of the copper material is thickened to 1oz. The gold-plated connector has good conductivity, which can reduce the black screen and blue screen splash caused by the increased resistance of oxidation and rust. Huaping problem.
Design advantages: Differential signal no via design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference, power circuit strengthened wiring design, PCB board miniaturization design, can reduce mechanism interference , No card hardware, easy product installation.
Production advantage: our factory direct sales, customized product production, strengthen welding at the metal welding point during production. And put on heat shrinkable tube protection, the product is sturdy and reliable, and there will be no disconnection problems. The products have good workmanship, are stable, reliable and durable.
Email：yxy@xt-xinte.com
Wechat:15012645226
No related record found