Tracking

(ADT-LINK) PCIe 5.0 x4 Gen5 Riser Cable with Dual Reverse Side-Bend Design - High-Speed Lossless Soft Ribbon Cable for Network Cards, Hard Drives and USB Cards

US$ 62.59

Version

Estimate Shipping Cost

Detail
- Product Name: (ADT-LINK) PCIe 5.0 x4 Gen5 Riser Cable with Dual Reverse Side-Bend Design - High-Speed Lossless Soft Ribbon Cable for Network Cards, Hard Drives and USB Cards
- Item NO.: F56163-B1-F56174-B1
- Weight: 0.058 kg = 0.1279 lb = 2.0459 oz
- Category: Computer Accessories
- Brand: ADT-Link
- Creation Time: 2026-10-13
- (ADT-LINK) PCIe 5.0 x4 Gen5 Riser Cable with Dual Reverse Side-Bend Design - High-Speed Lossless Soft Ribbon Cable for Network Cards, Hard Drives and USB Cards
(ADT-LINK) PCIe 5.0 x4 Gen5 Riser Cable with Dual Reverse Side-Bend Design - High-Speed Lossless Soft Ribbon Cable for Network Cards, Hard Drives and USB Cards

Product model: K22 series products

Product Name: PCI-E 5.0 x4 Double Reverse Side Bending High Speed Lossless Extension Cable
Wire length: 30CM (supporting customized length of 15-100cm, welcome deep cooperation)
Applicable card configuration: wireless network card, wired network card, data acquisition card, USB card, solid-state drive card, as long as the PCIe card is x4 and the motherboard slot is x4 interface, it can be supported.
Speed and bandwidth: PCIe 5.0 x4 Gen5 128Gbps
Procurement reminder: It is necessary to purchase 1-2 samples for testing and verification before making bulk purchases.
Friendly reminder: This product has many compatibility issues, and incorrect assembly or improper operation may burn your device. Purchase designated by professional engineers is restricted. This product is a customized item that cannot be returned or exchanged. Please consider and confirm before placing an order for purchase
Description of wire length and hole spacing:
The length in the options refers to the length of the wire, excluding PCB and connectors. The length of the wire is indicated by the red arrow in the following figure. The distance between screw holes should refer to the size indicated by the green arrow. There may be some deviation in the length of the wire, so please do not take pictures if you mind.
Product Advantages:
1、 The advantage of the wire is that ADT has independently developed and designed the 5th generation anti-interference low resistance wire with a scratch resistant and wear-resistant outer sheath, and supports stable transmission of PCIe 5.0 at high frequencies.
2、 Line length advantage, customization is accepted from 20cm to 60cm. Please contact customer service for customization.
3、 The product is made of high-quality materials, with precise PCB craftsmanship. The PCB is made of high TG board, and the copper material thickness is thickened to 1oz, with gold fingers sunk in gold.
4、 The wire used in the product is already very durable. Aluminum alloy gaskets with a thickness of up to 2mm are used to protect the metal welding points, and screws are locked and fastened. The product is sturdy, reliable, resistant to pulling, anti-interference, and will not have problems such as breakage or nail drop. The wire can be bent and folded without affecting its use.
Laboratory test results?
Tested with nVidia RTX 5070 and AMD RX9070, both can achieve PCIe 5.0 x4

What is the quality of the wire? Is there any blocking?
There is a metal layer shielding, using advanced EMI shielding conductive polymers, new materials for EMI shielding, and flat cable design. This technology allows each cable to be completely covered by electromagnetic interference shielding of conductive polymers to prevent incident or outgoing emissions of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of cables.

Share:: >

Adding to cart succeed

(ADT-LINK) PCIe 5.0 x4 Gen5 Riser Cable with Dual Reverse Side-Bend Design - High-Speed Lossless Soft Ribbon Cable for Network Cards, Hard Drives and USB Cards

color:red,size:xxl

Subtotal: US$ 0

View My Cart

Checkout