Copy and share this link on social network or send it to your friends
CopyProduct Name | AB-89 Series Bi-directional signal amplification module for micro-power wireless products frequency range 850MHz-930MHz |
Item NO. | F47092 |
Weight | 0.5 kg = 1.1023 lb = 17.6370 oz |
Category | Consumer Electronics |
Creation Time | 2022-04-08 |
Band Bi-directional signal amplification
Technical Specification
Model:AB-89
Introduction
The AB-89 Series Bi-directional signal amplification module is suitable for micro-power wireless products in the frequency range of 850MHz-930MHz.
It is suitable for various IoT wireless data acquisition products working in the 850MHZ-930MHZ frequency band。
Main characteristics
1. Built-in TX/RX automatic switching circuit, TX/RX status can be switched independently without external control signal.
2. It works in RX status by default, and enhances the receiving signal. When the transmitting signal of the superior device is detected, the module instantly switches to the TX status.
3. The TX gain is adjustable, which is convenient to be compatible with wireless devices with different transmission powers.
4. Compatible with various modulation methods such as LORA and FSK/ASK/OOK/MSK/GFSK.
Specifications
Working frequency: |
850MHz – 930MHz |
RX gain: |
11dB±2dB |
NF: |
≤1.5dB |
TX gain: |
0dB – 10dB (±2dB)Adjustable |
TX/RX switching threshold: |
-2dBm |
TX input power range: |
1dBm - 31dBm |
Maximum transmit power: |
31dBm (1.3w) |
Status indication : |
RX status: Green light is on, Blue light is off |
TX status: Blue light is on, Green light is off |
|
Operating Voltage : |
5V(4.75V-5.25V) |
Working current : |
RX status :10mA(±3mA) |
TX status :≤720mA |
|
Overall dimension : |
79mm*64mm*23mm(L*W*H) |
Tips: The output power of the upper-level device must be at least 3dB higher than the switching threshold, which means that the output power of the upper-level device cannot be lower than 1dBm, otherwise it may cause unstable operation.
Chang the TX Gain
When the potentiometer is turned counterclockwise to the limit, the gain is 0dB;
When the potentiometer is turned clockwise to the limit, the gain is 10dB (±2dB).
Reference design
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found