Home>DIY RC Drone Accessories>ESC>iFlight SucceX-D F7 TwinG Stack with SucceX-D F7 TwinG FC/SucceX 50A 60A 2-6S BLHeli_32 4 in 1 ESC for DJI Air Unit HD FPV System

iFlight SucceX-D F7 TwinG Stack with SucceX-D F7 TwinG FC/SucceX 50A 60A 2-6S BLHeli_32 4 in 1 ESC for DJI Air Unit HD FPV System Item NO.: F32738 F32739 F32740

Name: iFlight SucceX-D F7 TwinG Stack with SucceX-D F7 TwinG FC/SucceX 50A 60A 2-6S BLHeli_32 4 in 1 ESC for DJI Air Unit HD FPV System
Brand: iFlight
SKU: F32738 F32739 F32740
Price: 69.14 USD
Availability: SoldOut

Write a Review

US$ 69.14

US$ 81.34 Save US$ 12.20 (15% Off)

Sold Out

Product Name	iFlight SucceX-D F7 TwinG Stack with SucceX-D F7 TwinG FC/SucceX 50A 60A 2-6S BLHeli_32 4 in 1 ESC for DJI Air Unit HD FPV System
Item NO.	F32738 F32739 F32740
Weight	0.015 kg = 0.0331 lb = 0.5291 oz
Category	DIY RC Drone Accessories > ESC
Brand	iFlight
Creation Time	2019-10-16

iFlight SucceX-D F7 TwinG Stack with SucceX-D F7 TwinG FC/SucceX 50A 60A 2-6S BLHeli_32 4 in 1 ESC for DJI Air Unit HD FPV System

NOTE：
1.The DJI Air Unit is not included in the package.

2.If you use your own DJI Remote Controller, you MUST update your firmware betaflight_4.1.0_STM32F7X2 configurator betaflight to 10.6.0 to set up and bind your DJI remote controller.

Model 1 setup：Reveiver tap -----> Choose “Spektrum / Graupner / JR (TAER1234)”
Model 2 setup：Reveiver tap -----> Choose “Frsky / Futaba / Hitec (AETR1234)”

DOWNLOADS：

betaflight_4.1.0_STM32F7X2
betaflight 10.6.0 configurator
SucceX-D F7 Manual Instruction
The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system.To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In additionally, we add the popular and reliable USB Type-C instead of Micro USB which makes connection easily.

Features

• Universal USB Type C connector instead of micro USB

• Plug-and-Play. No need to solder tiny wires.)

• Supports BLHeli pass-through for easy ESC upgrade and configuration.

• Designed to support DJI Digital FPV.

SucceX-D F7TwinG SPECS：

- MCU：216MHz STM32F722RET6

- Gyro: 2x ICM20689

- Baro：YES

- Betaflight OSD：YES

- Blackbox: 32MB

- 5 x Uarts

- 8 x Motor outputs

- 8 pin 4in1 ESC port

- 4-pin VTX connector

- Betaflight Firmware：betaflight_4.0.5_STM32F7X2.hex

- CLI config：IFLIGHTF7_TWIN_G.config

Physical

- Mounting hole：30.5*30.5mm，φ4mm with Grommets φ3mm

- Size：36*36mm

- Weight：7.5g

Package included:

- SucceX-D F7 TwinG Flight Controller (HD Version)

No related record found

Write a Review

All Categories

iFlight SucceX-D F7 TwinG Stack with SucceX-D F7 TwinG FC/SucceX 50A 60A 2-6S BLHeli_32 4 in 1 ESC for DJI Air Unit HD FPV System Item NO.: F32738 F32739 F32740

You May Also Like