Home>DIY RC Drone Accessories>Motor>iFlight Strider X5 V2 230MM Wheelbase 5 Inch Freestyle FPV Frame For DIY RC Racer Quadcopter FPV Drone
iFlight Strider X5 V2 230MM Wheelbase 5 Inch Freestyle FPV Frame For DIY RC Racer Quadcopter FPV Drone

iFlight Strider X5 V2 230MM Wheelbase 5 Inch Freestyle FPV Frame For DIY RC Racer Quadcopter FPV Drone Item NO.: F25660

Write a Review
US$ 22.13
US$ 26.03 Save US$ 3.90 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • iFlight Strider X5 V2 230MM Wheelbase 5 Inch Freestyle FPV Frame For DIY RC Racer Quadcopter FPV Drone
Product Name iFlight Strider X5 V2 230MM Wheelbase 5 Inch Freestyle FPV Frame For DIY RC Racer Quadcopter FPV Drone
Item NO. F25660
Weight 0.12 kg = 0.2646 lb = 4.2329 oz
Category DIY RC Drone Accessories > Motor
Tag
Brand iFlight
Creation Time 2018-08-07

iFlight Strider X5 V2 230MM Wheelbase 5 Inch Freestyle FPV Frame For DIY RC Racer Quadcopter FPV Drone

The Strider X5 V2 features an extended structure with a wheelbase of 230 and a front angle of 72° for the front of the arm.

Following the arm structure of the first generation Strider X5, the independent design, adapting to the standard flight control, the lower battery, the arm and the arm are tightly fastened, and the arm group is locked with the fuselage, after being subjected to force analysis, The layers are tightly connected to each other, and the balance is equal. The force received by the arm is divided into various points through the mechanical structure. Reasonable analysis makes the frame scientific while being lightweight, 4mm thick and 13mm wide arm. To ensure the rigidity of the arm and reduce the wind resistance, the arm is changed to be independent and separable, which is very convenient for maintenance and which is changed. The arm that sinks inside, using the willow nut, makes the arm group and the fuselage well integrated, with side panels,
The lens is compatible with all cameras at the same time, the lens angle is 30-80 degrees fine-tuned

Technical Parameters:
Support motor: 22 series, 23 series motor
Support propeller: 4 inches / 5 inches
 

Working voltage: 3-6S
 
Recommended configuration:
Exercise: Force 2205 KV2300 motor, iFlight 30A 4in1 ESC, F4 flight control, 5040 three-blade paddle, 1300mAh 4S70C R&F battery
 
Competition: ix2205 KV2300 motor, iFlight 30A 4in1 ESC, F4 flight control, 5040 three-blade paddle, 1300mAh 4S80C R&F battery
 
FREESTYLE: Force 2207 KV2700 motor iFlight 30A 4in1 ESC, F7 flight control, 5045 three-blade propeller: 1300mAh 4s 80C R&F battery


No related record found