iFlight ProTek25 HD 114mm 2.5inch Drone BNF with Vista Digital HD System/SucceX-D 20A BWhoop AIO/XING 1404 Motor for FPV Drone

Description：

Our all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here... 

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps. 

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization). 

Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery. 

Features:

No Props or frame in view!

Caddx Vista Digital HD System

High performance SucceX-D 20A Whoop F4 AIO Board to save weight and space

T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

Low Resonance frame construction (Less Jello, more Cinematic footage)

Butter smooth XING 1404 5500KV motors

Pre-tuned with smooth freestyle settings

PRE-TUNED & PRE-SETUP:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

ProTek25 BNF Specs:

SucceX 

Motor: XING 1404 5500KV

Wheelbase: 114mm

Body Size: 91*68.7mm

Bottom plate thickness: 3mm

Top plate thickness: 2mm

Top and bottom plate spacing: 24mm (aluminum standoff height) 

Propeller size: 2.5 inch

FC pattern: 25.5*25.5mm / 20*20mmmm

FPV cam spacing: 20mm

Weight: 194.3g (without battery)

ProTek25 HD Quad BNF Included Components and Parts

pre-built and tested Quadcopter

1x ProTek25 Frame

1x Caddx Vista Digital HD System Kit

1x Albatross LHCP RP-SMA 5.8g antenna

2x Nazgul 2525 propeller (Set of 4 - Color May Vary)

2x iFlight Lipo Strap 15*200mm (Color May Vary)

FC // SucceX-D 20A F4 Whoop AIO

Size：30.5*30.5mm

Mounting pattern：25.5*25.5mm/φ3mm

Connector：Micro-USB

MCU：STM32F411

Gyro：MPU6000

Blackbox：8MB

BEC output：5V 2A/10V 2A

INA pad：UART2 (nR2) 

Barometer：no

Constant current：20A，25A（Burst）

Input：2-4S

Current sensor：yes

BLHeli：BLHeli-S

ESC Telemetry：no

Target：IFLIGHT_F411_PRO

ESC Firmware：G-H-30 BLS

Additional Suggested Parts（do not include）

DJI HD FPV Goggles

Radio Controller

Battery 4S 850mAh

Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.