iFlight Nazgul5 V2 Nazgul5 HD 5Inch RC FPV Racing Drone w/ Caddx Nebula Nano Digital HD System SucceX-E F7 45A BLHeli_S ESC Item NO.: F43891-A1 A2 A3 A4 A5 A8 F43892-A1 A2 A8

iFlight Nazgul5 V2 Nazgul5 HD 5Inch RC FPV Racing Drone w/ Caddx Nebula Nano Digital HD System SucceX-E F7 45A BLHeli_S ESC

Notice: There is Nazgul5 V2 drone and Nazgul5 HD drone, pls choose which one you like. thank you

PRODUCT DESCRIPTION
Note: iFlight R81-SPI Frsky  (Compatible with Frsky ACCST D8）
Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

HIGHLIGHTS:
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING 2207 motors with LED Light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks

XL5 V5 frame specs:
SucceX-E F7 45A flight stack
XING 2207 with LED Light FPV Motor （6S 1800KV / 4S 2750KV)
Wheelbase:   240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 399g (without battery)

PRE-TUNED & PRE-SETUP:
- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

Nazgul5 V2 Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
1x Albatross RHCP SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

CHANGELOG:
June 2021: Caddx Ratel, 2.1mm lens camera changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19

Nazgul5 HD Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x Caddx Nebula Nano Digital HD System Kit
1x Albatross LHCP RP-SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F7 Flight controller
- MCU: STM32F22RET6 216 MHz
- Gyro: MPU6000
- Baro: BMP280(I2C）
- OSD: IFLIGHT OSD （AT7456E）
- BEC: 5V 2.5A
- BlackBox: 8MB
- Uart: 4*UART(UART1、UART2、UART4、UART5)
- UART1 for VTX HD/Analog Telemetry
- UART2 for Receiver
- UART4 for GPS 
- UART5 for ESC Telemetry
- 4×Dshot/PWM outputs
- Smartaudio & IRC Tramp VTX protocol supported
- WS2812 led Strip: Yes
- Bepper: Yes
- Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
- Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
- Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 36*43mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight: 15g (without wire)
- Supports 2-6S Lipo input
- EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
- Current sensor: YES
- BEC: NO
-Constant: 45A / Burst: 50A
- Supports: DShot150/300/600/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable
- The output power is stable;
- Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
- Output 48 frequency points, 
- Frequency lock fast, the boot does not interfere with companions;
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
  7V～36V，+12V/380mA@800mW;
- Small size:36*36*3mm
- Mounting holes 4-M3
- Lightweight: 7.2g(excluding antenna)

Specs:
- Item: SucceX-Force 800mW adjustable VTX
- Input voltage:5V
- Output voltage/ Max current: 5V 1A
- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW
- Output 48 frequency points, 
- size:36*36*3mm
- PIT/25mW/200mW/400mW/800mW

Additional Suggested Parts
Battery 4S 1550mAh
Battery 6S 1300mAh
GoPro Mounts