iFlight Nazgul Evoque F5D 5inch HD 4S 6S FPV Drone BNF With Caddx Polar Vista HD System SucceX-D F7 55A Power Stack for FPV Item NO.: F44602-D1 F44602-D2 F44602-D2F44602-D7 F44602-D8

iFlight Nazgul Evoque F5D 5inch HD 4S 6S FPV Drone BNF With Caddx Polar Vista HD System SucceX-D F7 55A Power Stack for FPV

Note：Nazgul Evoque F5 is available in Squashed-X Geometry and DC (DeadCat) Geometry, please leave a message if you need Squashed-X Geometry, otherwise we will ship DC (DeadCat) Geometry by default，thanks！

PRODUCT DESCRIPTION

The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics

we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using

the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels - Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well... These days are

over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.

Secured Integrated XT60 Battery Plug - As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was

only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics - F7 55A Power Stack

Our SucceX Mini F7 TwinG flight control with Gyro Fusion technology, modern USB type-C plug, 32MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the gods with our new SucceX Mini 55A ESC packed with better heat-dissipating Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise, besides the pre-soldered directly installed Capacitor right next to your battery leads.

XING2 Performance Motors - The Best Motors Just Got Better

7075 aluminum bell, 5mm titanium alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased

performance and efficiency. Not to mention the typical XING damping ring between the bell and bearing to increase durability and smoothen out your flights.

Illumination - Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a

hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and

gives you some style at the next night's race.

Digital HD Experience - Caddx Polar

Equipped with the DJI Digital FPV system with 50mBit transmission for 720P video feed on your DJI FPV Goggles and range you've never expected with your old analog VTX. We are

using the new CaddX Vista Polar HD system, installed in the back of your quad. The Polar camera offers better image quality than other CaddX cams. Better low light performance

and more detailed shadows. In daylight similar to the Nebula Pro with improved dynamic range.

Specifications:

Total Dimensions: 136*190mm (body dimension)

Geometry: Squashed-X or DC (DeadCat) frame available

Bottom to top distance: 28mm

Arm Thickness: 6mm

Bottom plate thickness: 3mm

Top plate thickness: 3mm

Upper(middle) plate thickness: 3mm

XING2 2207 motors (4S/6S)

Nazgul F5 propellers

Weight: 412g (without battery and GoPro mount)

FC // SucceX-D Mini F7

MCU: 216MHz STM32F722

Gyro：2x ICM20689

Blackbox：32MB

Betaflight OSD: YES

BEC: 5V 2.5A / 9V 2.5A

Current sensor scale:  100

Inverter for SBUS input (UART2-RX)

Smart audio & Tramp VTX protocol supported

Beeper pad: Yes

RSSI input pad: No

UARTs：5

Motor outputs: 4

8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)

6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)

BLHeli32 Telemetry：Yes

Input voltage：recommended 2-6S, MAX 6S

Firmware target: IFLIGHT_F722_TWING

Mounting pattern: 20*20mm φ3

Dimensions:   29*29mm

USB Type-C

ESC // SucceX Mini 55A

Dimension: 31*29.5mm

Mounting Holes: 20*20mm/Φ4mm

Weight: 10.8g

Supports 2-6S Lipo input

MCU： G071

Constant: 55 Amps

Burst: 60 Amps

Current sensor: Yes

BEC: No

Current rate: 100

Supports DShot DShot150/300/600/MultiShot/ OneShot etc.

Firmware: BLHeli 32

Target:  iFlight-G071-4IN1

Package included：

1 x Nazgul Evoque F5(Squashed X or Deadcat pattern)

4 x Nazgul F5 Prop

2 sets of Battery Pads

4 x Battery straps

1 x Screws bag