iFlight Nazgul Evoque F5 5inch Analog FPV Drone BNF With XING-E Pro 2207 2750KV Motor SucceX-E F4 55A Power Stack for FPV Item NO.: F44601-D1 F44601-D2 F44601-D3 F44601-D4 F44601-D5 F44601-D8

iFlight Nazgul Evoque F5 5inch Analog FPV Drone BNF With XING-E Pro 2207 2750KV Motor SucceX-E F4 55A Power Stack for FPV

Note：Nazgul Evoque F5 is available in Squashed-X Geometry and DC (DeadCat) Geometry, please leave a message if you need Squashed-X Geometry, otherwise we will ship DC (DeadCat) Geometry by default，thanks！

PRODUCT DESCRIPTION

The Secret Of Ultimate Performance Is Passion

That was the slogan for our newest approach to creating this piece of art! Fully protected electronics, fully illuminated, coupled with all the latest and greatest electronics

we can offer. Months of engineering went into this BNF and all the lessons learned before, making sure that beginners, as well as experienced pilots, would fully enjoy using

the new Nazgul Evoque from the first second they use it.

Lightweight Side Panels - Keep Your Rig Clean

Ever felt like a lawnmower cutting through the grass in your early days, props cutting and throwing wet grass all over and inside your flight stack? Well.. These days are

over! The new side panels will not only protect from wetness but also protect the internals from any strikes hitting off little components from your flight controller.

Secured Integrated XT60 Battery Plug - As Safe, It Can Be

Dangling battery plugs will ALWAYS find a way in your props, there's always that one time you forgot to secure it properly and almost cut off the cable while flying. There was only one way to get rid of that and we think we might have found a solution. The integrated XT60 connector on the back lets you securely plug in your battery leading all cables away from your props.

High-Performance Electronics - F4 55A Power Stack

Our SucceX Mini F4 flight control, modern USB type-C plug, 32MB flash for every tuning session, and 5 UARTs for whatever equipment you might possibly wanna use. Power from the

gods with our new SucceX Mini 55A ESC packed with better heat-dissipating Mosfets and a whole bunch of SMD capacitors to filter out possible motor noise, besides the

pre-soldered directly installed Capacitor right next to your battery leads.

XING-E Pro Performance Motors

Aluminum unibell, 5mm steel alloy shaft, NSK durable bearings, Center slotted magnets for better response, and lower air gaps for a higher magnetic flux with increased

performance and efficiency.

Illumination - Let It Be Green

360-degree illumination for day and night. Maybe the prettiest BNF out there but also a practical one. The bottom light indicates battery voltage, a quick check gives you a

hint of the voltage still remaining; Never lift off with an empty battery again. Installed LED wires in the side panels and the bottom of the arms are also illuminated and

gives you some style at the next night's race.

SucceX Force 600mW - Analog Reliable Power

Equipped with our latest 600mW Mini VTX to go far. Stable power output and fast frequency lock without interfering with other pilots when powering up. VTX telemetry built-in as

well as electrical interference filters for whatever noise that might get through and an MMCX antenna connector that doesn't hop off in wild crashes.

Specifications:

Total Dimensions: 166*139mm (body dimension)

Geometry: Squashed-X or DC (DeadCat) frame available

Bottom to top distance: 28mm

Arm Thickness: 6mm

Bottom plate thickness: 2.5mm

Top plate thickness: 2mm

Upper(middle) plate thickness: 3mm

FC // SucceX- E Mini F7

ESC // SucceX-E Mini 45A BLHeli32

XING-E Pro 2207 4S/6S (Link)

Nazgul F5 propellers

Weight: 392.6g (without battery and GoPro mount)

FC // SucceX-E Mini F7

MCU: STM32F22RET6 216 MHz

Gyro: MPU6000

Baro: DSP310

OSD: IFLIGHT OSD （AT7456E）

BEC: 5V 2.5A

BlackBox: 16MB

Uart: 4*UART(UART1、UART2、UART4、UART5)

UART1 for VTX HD/Analog Telemetry

UART2 for Receiver

UART4 for GPS

UART5 for ESC Telemetry

4×Dshot/PWM outputs

Smartaudio & IRC Tramp VTX protocol supported

WS2812 led Strip: Yes

Bepper: Yes

Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0

Outer Size: 27*27mm / 20*20mm φ3 mounting

Weight: 4.9g

ESC // SucceX-E Mini 45A

Input: 2-6s LiPoly

Constant: 45 Amps (per channel)

Burst: 55 Amps (per channel)

BEC: No

BlHeli32 telemetry: Yes

Dimensions: 31x29.5mm

Mounting Holes: 20*20mm φ3mm with Grommets φ2mm

Weight: 6.7g (without motor wires)

Target: iFlight-G071-4IN1

VTX // 5.8GHz SucceX Mini Micro 600mW VTX

Power: PIT/25/200/400mW/600mW

Antenna Interface: MMCX

VTX protocol: IRC Tramp

Output:  40 channels

Package included：

1 x Nazgul Evoque F5 Analog (Squashed X or DeadCat Pattern)

4 x Nazgul F5 Props

2 sets of Battery pads

4 x Battery straps

1 Screw bag