iFlight CineBee 75HD 75mm 2-3S SPLIT Nano HD FPV Whoop Racing Drone PNP BNF with Runcam Split 3 Nano Camera/Beemotor 1103 10000KV Motor/HQ 40mm Prop

iFlight CineBee 75HD 75mm 2-3S SPLIT Nano HD FPV Whoop Racing Drone PNP BNF with Runcam Split 3 Nano Camera/Beemotor 1103 10000KV Motor/HQ 40mm Prop Item NO: F31746-F31747-F31748-F31749-F31750

US$ 175.99
Version:
PNP NO RX BNF FS-A8S V2 BNF Frsky XM+ BNF Frsky R-XSR BNF TBS NANO
Quantity:
Shipping Cost:
Estimate Shipping Cost
  • iFlight CineBee 75HD 75mm 2-3S SPLIT Nano HD FPV Whoop Racing Drone PNP BNF with Runcam Split 3 Nano Camera/Beemotor 1103 10000KV Motor/HQ 40mm Prop
Product Name iFlight CineBee 75HD 75mm 2-3S SPLIT Nano HD FPV Whoop Racing Drone PNP BNF with Runcam Split 3 Nano Camera/Beemotor 1103 10000KV Motor/HQ 40mm Prop
Item NO F31746-F31747-F31748-F31749-F31750
Weight 0.0800 kg = 0.1764 lb = 2.8219 oz
Category RC Toy Drone
Brand iFlight
Creation time 2019-09-11

iFlight CineBee 75HD 75mm 2-3S SPLIT Nano HD FPV Whoop Racing Drone PNP BNF with Runcam Split 3 Nano Camera/Beemotor 1103 10000KV Motor/HQ 40mm Prop
 

iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design, carrying a 1080p (up to 60fps) micro cam stack and recording JELLOFREE footage flying through smallest gaps and spots. If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-3S.

Our target was pretty clear, create a lightweight, durable but jellofree whoop that can shoot high-quality HD videos. We decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash-resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keep your props in a good condition, and you won't have to worry about jello!

Features:

- Ultra-light but high performance

- JELLOFREE durable carbon/plastic construction

- No props or prop guards in view

- Upgradeable, versatile, futureproof

Specification:

- Total Dimensions: 110x93x30mm
- Frame Wheelbase: 75mm
- Build Weight: 66.2g
- SucceX Micro 16x16 Tower 2-4S
-
 iFlight 1103 motors (1.5mm shaft)
Runcam Split 3 nano HD FPV cam
HQ 1.6x1.6x4 props
- iFlight Prop Guards 40mm

SucceX Mirco F4 Flight Tower System 16x16mm

SucceX F4 Flight Controller

-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target: MATEKF411

SucceX Mirco 12A Brushless ESC

-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC: None
-ESC protocol: PWM, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g

SucceX Mirco VTX

-Power : PIT/25/100/200mW
-Antenna interface: IPEX (UFL)
-Telemetry: IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g

Motor KV Variants:

-We offer several motor setups to fit your desired performance, equipment or just preference.
-(2S), (3S) will be available.

SD card insert and ejection:

-The HD cam PCB is conveniently placed under the frame, protected by a cover.
-To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.

VTX control implementation:

-VTX can be conveniently set up in your OSD.

Propeller:

-HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant!

Receivers available currently:

-Frsky XM+

-Flysky FS-A8S

-Futaba FT4X

-SDMX RM601X

-Frsky XM

-Frsky R-XSR

Package Included:

1 x CineBee 75HD
2 sets x HQ 40mm micro whoop props

Warm tips: Grasp bell before removing props to avoid damage.


No related record found

You May Also Like