Home>RC Toy Drone>iFlight >iFlight Cidora SL5-E 215mm 5inch 4S / 6S FPV Racing Drone PNP BNF with Caddx Ratel Camera/Nazgul 5140 Prop/XING-E 2207 2750KV/1800KV Motor

iFlight Cidora SL5-E 215mm 5inch 4S / 6S FPV Racing Drone PNP BNF with Caddx Ratel Camera/Nazgul 5140 Prop/XING-E 2207 2750KV/1800KV Motor Item NO.: F33083-F33084-F33085-F33086-F32716-F32717-F32718-F32719

Name: iFlight Cidora SL5-E 215mm 5inch 4S / 6S FPV Racing Drone PNP BNF with Caddx Ratel Camera/Nazgul 5140 Prop/XING-E 2207 2750KV/1800KV Motor
Brand: iFlight
SKU: F33083-F33084-F33085-F33086-F32716-F32717-F32718-F32719
Price: 206.75 USD
Availability: SoldOut

Write a Review

US$ 206.75

Sold Out

iFlight Cidora SL5-E 215mm 5inch 4S / 6S FPV Racing Drone PNP BNF with Caddx Ratel Camera/Nazgul 5140 Prop/XING-E 2207 2750KV/1800KV Motor

Product Name	iFlight Cidora SL5-E 215mm 5inch 4S / 6S FPV Racing Drone PNP BNF with Caddx Ratel Camera/Nazgul 5140 Prop/XING-E 2207 2750KV/1800KV Motor
Item NO.	F33083-F33084-F33085-F33086-F32716-F32717-F32718-F32719
Weight	0.5 kg = 1.1023 lb = 17.6370 oz
Category	RC Toy Drone > iFlight
Brand	iFlight
Creation Time	2019-10-18

iFlight Cidora SL5-E 215mm 5inch 4S / 6S FPV Racing Drone PNP BNF with Caddx Ratel Camera/Nazgul 5140 Prop/XING-E 2207 2750KV/1800KV Motor

The only difference between 4S Version and 6S Version :
4S Version with 2750KV Motor
6S Version with 1800KV Motor

PRODUCT DESCRIPTION
Cidora SL5-E 4S FPV Drone - BNF with our best iFlight components installed and pre-tuned! SL5 is a 5" size BNF (Bind-and-Fly) quadcopter that comes fully built with everything you need to liftoff!

Different power version (4S cell count) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio.

Features：
- Full 3K Carbon Fiber airframe
- Easy arm swaps -215mm wheelbase，115g
- Popular Squish X configuration
- SucceX-E F4 with 45A 4in1 ESC stack

Specifications:
- Total Dimensions: 165*138mm (body dimension)
- Frame Wheelbase: 215mm
- SucceX-E F4 Flight controller
- SucceX-E 45A 2-6s 4-in-1 ESC Dshot1200
- XING-E 2207 2750KV (4S)
- Caddx.us Ratel 2.1mm FPV cam
- Nazgul 5140 propellers grey
- Weight: 384.2 (without GoPro TPU mount)

SucceX-E F4 Flight controller Specification:
- MCU：STM32F405
- IMU：MPU6000
- Betaflight OSD：YES
- Blackbox：8MB
- 4X Uarts（1 2 3 6 )
- 8 x Dshot/Proshot/Oneshot output
- 8 x individual ESC power/ signal pads
- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
- VTX protocol：YES（IRC Tramp）
- WS2812 led Strip：YES
- Baro：No
- Beeper：YES
- Input：2-6S（Max 8S）
- BEC：5V/2.5A cont
- Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex

Physical
- Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
- Dimensions：36*36mm
- Weight：7.6g

SucceX-E 45A 4in1 ESC Specification:
- Dimension: 40*43mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight:14.4g
- Supports 2-6S Lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
- Current sensor: YES
- BEC: NO
- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
- Target: G-H-30 BLS 16.7
-BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file
5.8G 0/25/100/200/400/600mW VTX
- Input voltage: 5V
- Channel: 48
- Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Caddx.us Ratel 2.1mm lens FPV cam

Recommend Parts (Not included):
-TPU 3D Printed Camera Mount for Gopro Hero 5/6/7 with ND8 Filter
-TPU 3D Printed Camera Mount for GoPro Session

Package Included:
-1x Cidora SL5-E 4S/6S FPV Drone - BNF (Battery not included)
-2 sets Nazgul 5140 propellers

NOTE: The Hero 7 camera and TPU print camera mount are not included.