Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop
Copy and share this link on social network or send it to your friends
Copy
Happymodel Mobula7 SE0802 0802 1-2S Brushless Motor 16000KV 19000KV 1.0mm Shaft Diameter Mini Motors for Indoor FPV Racing Drones
Gemfan 1220 1.2x2x4 31mm 1mm Hole 4-blade Propeller PC CW CCW Props for 0703-1103 RC Drone FPV Racing Brushless Motor
JMT 65mm Bwhoop65 Frame Brushless Whoop Rack for Indoor FPV Racing Drone RC Quadcopter Aircraft
| Product Name | Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop |
| Item NO. | F26255 |
| Weight | 0.02 kg = 0.0441 lb = 0.7055 oz |
| Category | DIY RC Drone Accessories > Receiver |
| Brand | Happymodel |
| Creation Time | 2018-10-10 |
Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop
What do we mean by
Compatible Frsky Receiver
Have a little solder joint on
We have some Frsky F3 FC with a little solder joint on it,which were Remove from the Mobula7 Drones,All work well,now we would like to sell them at a quite low price,hope you will like it,thanks
Here are some photos of it
CRAZYBEE F3 PRO FS Compatible flysky receiver
|
Flight controller |
CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Board size: 28.5 * 28.5MM
Weight:4.2g Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in SPI Flysky receiver with telemetry(D8/D16 switchable) Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection Heading LED Ready |
|
Onboard 4in1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) |
|
Built-in Flysky receiver |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
1-2S Brushless F3 flight controller with internal 4in1 ESC、OSD、2.4G receiver、Current sensor、Buck / Booster is coming. You only need to add a VTX and Camera . It’s a best choice for 2S Brushless tiny whoop.
Package include:
1 x CrazybeeF3 PRO FS flight controller
2 x Power cables
1 set Shock absorbing rubber and screws
CRAZYBEEF3 PRO FR Compatible Frsky Receiver
|
Flight controller |
CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Board size: 28.5 * 28.5MM
Weight:4.2g Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable) Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection Heading LED Ready |
|
Onboard 4in1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) |
|
Built-in Frsky NON-EU receiver |
SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
The world first 1-2S Brushless F3 flight controller with internal 4in1 ESC、OSD、2.4G receiver、Current sensor、Buck / Booster is coming. You only need to add a VTX and Camera . It’s a best choice for 2S Brushless tiny whoop.
Package include:
1 x CrazybeeF3FR PRO flight controller
2 x Power cables
1 set Shock absorbing rubber and screws
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
2019-07-08
2018-12-02