XT-XINTE Sata3.0 Expansion Card to PCI-E 4 Port 6G Riser Card 88SE9230 Extended IPFS Hard Disk RAID Card Item NO.: F27118

XT-XINTE Sata3.0 Expansion Card to PCI-E 4 Port 6G Riser Card 88SE9230 Extended IPFS Hard Disk RAID Card

Product specifications:
Product Description: Expands 4 SATA6G interface array cards through PCI-Express slots
Supported RAID modes: RAID 0, RAID 1, RAID 10, HyperDuo
Features:
Compliant with PCI-Experss specification V2.0 and backward compatible PCI-Express 1.x
Compliant with Serial ATA Specification 3.0
PCI Express X2 interface, compatible with PCI Express x4, x8 and x16 slots.
Supported communication rates of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps
Hot swap and hot swap.
Support for native command queue (NCQ)
Supports FIS switching based on port multiplier switches or commands.
Compatible with SATA 6G, 3G and 1.5G hard drives.
Support for RAID functions: RAID 0, RAID 1, RAID 10, HyperDuo.

System Requirements
Support for WindowsXP/Vista/7/8/Server 2008 R2 / 10, Linux 2.6.x and above
Product driver file:
1. CD: ... DRIVER\SATA CARD\Marvell\91XX_92XX Setup, then select the appropriate folder according to the system.
2. Group RAID software, enter the CD SATA CARD\Marvell\MSU 4.1.0.2023, install it
The PCIE to SATA3.0 riser card is used as follows:
First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions:
1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, it will not pass. Our card riser card starts the system.
2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
3, the above two conditions are available, if it still can not start, or repeatedly restart, then it may be the motherboard's hard disk interface and our adapter card conflict, the solution is to enter the motherboard BIOS, set the motherboard's hard disk interface options to Disabled, save and restart to start the system
Second, the common disk and PCIE to SATA3.0 connection conditions and solutions:
1. When the system disk is plugged into the motherboard, the ordinary disk is inserted in the PCIE to SATA3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup.
2, if the condition is established, or can not start the system, then you must enter the motherboard BIOS, set the system disk to the first boot.

Third, the system disk and the ordinary disk and PCIE to SATA3.0 connection and solution:
1. Prerequisites, if the system disk with the original motherboard installed system is AHCI mode test, can use the following methods to achieve, if it is IDE mode installed system, then you can only reinstall the system through PCIE to SATA3.0 .
2, 1 condition is established, you can not start to enter the motherboard BIOS, set the system disk to the first boot.
3, 1.2 conditions are met, or can not start, then it may be integrated SATA interface conflict, please enter the motherboard BIOS to set SATA to Disabled