XT-XINTE SATA HDD Docking Station 2.5/3.5 SATA IDE HDD Docking Station Clone USB 2.0 HUB support MS/M2/XD/CF/SD/TF Card Reader 480 Mbps Item NO.: F31972 F31973 F31974 F31975

XT-XINTE SATA HDD Docking Station 2.5/3.5" SATA IDE HDD Docking Station Clone USB 2.0 HUB support MS/M2/XD/CF/SD/TF Card Reader 480 Mbps

product description:    

Brand: XT-XINTE

Color: black red

specification:

Size: 130*100*65mm

Weight: 600g

Features : 

Support two SATA hard drives to read at the same time, free of tools to disassemble the hard drive, and support hot swap.

USB1.1/USB2.0 SATA I and SATA II are compatible.

High-speed USB2.0 data transfer rate of up to 480MB / sec.

The e-SATA interface can transmit at speeds up to 3GB/sec.

Supports all 2.5 '' / 3.5 '' SATA drives (maximum support 2TB)

Offline cloning speeds up to 70MB/sec.

One-button backup function (only on the USB port).

LED indicators indicate power and hard disk read and write status and cloning progress.

Support system (Window98/Me/2000/XP/Vista/7/Mac operating system 9.X/10.X/Linux).

Basic operation:

Plug the SATA hard drive into the hard drive bay.

Plug in the DC/12V power supply to the hard drive bay. Turn on the power switch and the POWER indicator will light. Make sure the hard drive is turned.

Connect the hard drive to the computer with a USB cable. Turn on my computer to see the drive letter, and the red signal indicator lights when the disk is read. (If it is a new hard disk, do the following: My computer right / management / disk management. Partitioning and formatting can be done.)

Press the single-button backup button to make a one-button backup. (See the one-key backup manual for details).

You can use the external e-SATA interface to connect to the computer e-SATA interface to transfer data.

When offline cloning, both A and B bits are plugged into SATA hard disk (A is the main disk, A disk ≤ B disk), turn on the power switch, and confirm that the hard disk has turned. Then press the two-button backup button twice, and the interval between the two is less than 5 seconds. The red indicator light flashes up for normal cloning. (Note: USB interface cannot be connected to the computer when offline cloning)

The product contains:

Host*1

USB cable*1

Power adapter (12V/3A)*1

Instruction manual*1