XT-XINTE R43SG-TB3 PCIe x16 to TB3 Extension Cable PCI-Express Cables eGPU Adapter External Graphics Card Stand Bracket for PC Item NO.: F32827-E2 F32828-E2

XT-XINTE R43SG-TB3 PCIe x16 to TB3 Extension Cable PCI-Express Cables eGPU Adapter External Graphics Card Stand Bracket for PC

In addition to notebooks, this product also supports Intel NUC motherboards, STX motherboards, ITX motherboards, and graphics cards for external use.

Product model: R43SG-TB3

Product name: Graphics card external adapter board extension cable

Wire length: 25cm, 50cm (for other lengths, please contact customer service.)

Graphics card compatibility: support new graphics cards that have been shipped out of the past three years (old graphics cards that have been shipped four years ago are not supported.)

Motherboard compatibility: Notebook, ITX/STX motherboard, NUC, only supports thunderbolt3, Thunderbolt-3 does not support USB interface.

Power supply description: Support power supply DELL DA-2 series (D220P-01/ADP-220AB) 12V/18A/220W power supply, or standard ATX power supply above 500W, the power supply needs to be prepared by the buyer.

Bandwidth speed: PCIe3.0x4 (32G/s)

Product accessories: 30cm Thunderbolt-3 cable.

Precautions:

1. Be sure to recognize the direction when plugging in, do not plug it in reverse or off-position to prevent burning of the device. When plugging in, first hold the socket of the device before plugging in to avoid inserting the socket pins with excessive force. It is forbidden to bend or pull within 2cm of the welding place between the two ends of the wire and the circuit board.

2. The signal driving capability of various motherboards and equipment is different. Our test results are not guaranteed to be consistent with your test results. As long as the extension cable is connected, the signal will be lost. Those with high requirements, please do not buy.

3. The graphics card or motherboard is an electronic device that will age and oxidize over time, and then connecting an extension cord will only make it more unstable. Old devices are not supported. Please do not purchase equipment older than 3 years.

4. We are sorry that we cannot provide technical guidance on product installation, driver compatibility, etc.

Product accessories: Hexagonal copper pillars and related screws for fixing the graphics card, and a single 6P to dual 8P graphics card power adapter cable.

The installation of the hexagonal copper column is as follows:

What is the quality of the wire? Is there a shield?

With shielding, advanced EMI shielding conductive polymer is used, new materials are used for EMI shielding, and flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shield of the conductive polymer to prevent the incident or outgoing emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the extender.

What are the options for R3G external power supply?

There are two types, namely DELL power supply and ATX power supply