Home>Consumer Electronics>Computer Accessories>SSD Case>XT-XINTE USB3.1 Type C NVMe SSD Enclosure Adapter M KEY Connector M.2 NGFF to USB 3.1 Converter Hard Disk Drive HDD Case Aluminum HDD Box
XT-XINTE USB3.1 Type C NVMe SSD Enclosure Adapter M KEY Connector M.2 NGFF to USB 3.1 Converter Hard Disk Drive HDD Case Aluminum HDD Box

XT-XINTE USB3.1 Type C NVMe SSD Enclosure Adapter M KEY Connector M.2 NGFF to USB 3.1 Converter Hard Disk Drive HDD Case Aluminum HDD Box Item NO.: /F25570

Write a Review
US$ 30.28
US$ 35.62 Save US$ 5.34 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
  • XT-XINTE LM902 NVME Aluminum USB3.1 TO PCI-E NVNE NGFF SSD HDD Enclosure TYPE C3.1 M.2 to USB
Product Name XT-XINTE USB3.1 Type C NVMe SSD Enclosure Adapter M KEY Connector M.2 NGFF to USB 3.1 Converter Hard Disk Drive HDD Case Aluminum HDD Box
Item NO. /F25570
Weight 0.134 kg = 0.2954 lb = 4.7267 oz
Category Consumer Electronics > Computer Accessories > SSD Case
Brand XT-XINTE
Creation Time 2018-06-06


Aluminum NVMe PCIE USB3.1 HDD Enclosure M.2 to USB SSD Hard Disk Drive Case Type C 3.1 M KEY Connector HDD Box for Desktop PC

Note: 
 
This case use for mobile hard disk, can't use it as the system disk.
 
it work with Samsung NVME M.2 hard disk . But Samsung Data Migration is not
 
supported, becuase of Samsung_Data_Migration is used to clone the system.


product Description

Item: USB3.1 TYPE-C NVMe

Size: 107*46*10mm

Material: Aluminum

Protocol : NVMe

Connector : TYPE-C

High Speed: 10Gbps

Support : 3D Game, 4K video ,HIFI Music, RAM Picture ect



M-key connector , Only support PCIE Protocol


Note : 
the HDD case come with the Type -a  to Type-c USB cable , if need 
Type -c to Type-c USB , you can add an USB cable . 



NVMe Supriority:

1. up theperformance

2. decrease delay

3. decrease power dissipation

4. IPOS of SSD will increase


Features:
Supports TRIM to the SSD
Integrates with USB Type-C multiplexer& configuration channel(CC)logic
Complies with PCI Express Base Specification Revision 3.1a
Complies with NVM Express 1.3
Complies with USB3.1 Gen 1 and Gen 2 Specification,USB Mass Storage Class,Bulk-only Transport Specification(Revision 1.0)
Complies with USB Attached SCSI Protocol(UASP)Specification(Revision 4)
Supports USB Super-Speed/High-Speed/Full-Speed Operation
Supports USB2.0/USB3.1 Gen 1/2 power saving mode
Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.1 Gen 1/2 device controller
Thirteen GPIOs for customization
Provides hardware controlled PWMs
Provides software utilities for downloading the upgraded firmware code under USB2.0/USB3.1 Gen1,2
Design for Windows 7,Windows 10 and MAC 10.10.5 or later version
Supports 25MHZ external crystal
Supports 3.3V I/O
Embedded 5V to 1.0V voltage regulator

Embedded 5V to 3.3V linear voltage regulator(LD0)  


No related record found