XT-XINTE Hard Disk Shock Absorber Bracket HDD SSD Converter Bracket Converts 3.5 to 5.25 Inch Hard Drive Bay Mounting Bracket Can Be Installed 8cm Fan for PC Case

Copy and share this link on social network or send it to your friends

Copy

XT-XINTE Hard Disk Shock Absorber Bracket HDD SSD Converter Bracket Converts 3.5 to 5.25 Inch Hard Drive Bay Mounting Bracket Can Be Installed 8cm Fan for PC Case Item NO: F31207 F31208 F31209

US$ 1.95 (15% Off)
US$ 2.29 Save US$ 0.34
Color:
Yellow Blue Red
Quantity:
Shipping Cost:
Estimate Shipping Cost
Product Name XT-XINTE Hard Disk Shock Absorber Bracket HDD SSD Converter Bracket Converts 3.5 to 5.25 Inch Hard Drive Bay Mounting Bracket Can Be Installed 8cm Fan for PC Case
Item NO F31207 F31208 F31209
Weight 0.0800 kg = 0.1764 lb = 2.8219 oz
Category Consumer Electronics
Brand XT-XINTE
Creation time 2019-09-07

XT-XINTE Hard Disk Shock Absorber Bracket HDD SSD Converter Bracket Converts 3.5 to 5.25 Inch Hard Drive Bay Mounting Bracket Can Be Installed 8cm Fan for PC Case


Specifications:
Model: 3.5" to 5.25"
Material: Metal Bracket+Rubber Nails
Size: 145x123x30mm

Features:

Hard Disk Protection : When the desktop computer hard disk is running, the platter rotates at a high speed of 7200 rpm/min, which realizes data reading and writing storage. When installed on the chassis, it will generate jitter, resonance and noise. In the long run, it will cause the hard disk damage. Therefore, it is imperative to eliminate resonance and noise, in order to protect the hard disk from the hard disk shock absorption and noise reduction bracket.
Active shock absorbing silica gel: Active organic silica gel is a special material with high strength and toughness. It has stable material properties and good shock absorption and noise reduction effect. This product uses active flexible silicone as a pillar, which is superior in vibration absorption and environmentally friendly.
Fan installation position: A fan installation position is reserved on the hard disk damping bracket ,can be install an 8CM cooling fan .This can make hard disk heat dissipation and cool well , ensure the stable operation of the hard disk.
Suitable for most chassis with optical drive, and one bracket occupies one optical drive. Fits in any 5.25 inch front bay.

Installation steps:

1. Install the two barrier strips with a screwdriver on both sides of the hard disk.
2. The installed barrier strip stuck in the shock absorbing silicone, and the two sides must be stuck.
3. Install the installed hard disk in the chassis drive position.

Package List:

1x Hard Disk Shock Absorber Bracket
6x Rubber Nail
2x Fixed Metal Strip
8x Mounting Screws


No related record found

You May Also Like